Kramer Electronics Operating via the VA-2002 Front Panel, Identification and Status Screens

Operating via the VA-2002 Front Panel

The name of the transferred logo appears in the Available Logos list in the Logo Info tab, as Figure 24 illustrates:

Figure 24: Logo Info Window (After RS-232 Transfer)

10Operating via the VA-2002 Front Panel

You can operate1 the VA-2002via the following front panel buttons:

￿￿An INSERT button to turn the logo On or Off

￿￿An ESC button to stop the execution of a command

￿￿An OK button to confirm a command

￿￿UP and DOWN buttons for moving up or down one step in the Main Menu

10.1Identification and Status Screens

After turning on the power on the VA-2002, the identification screen appears momentarily, as follows:

VA-2002

---------------------

(C) 2002 KRAMER

Figure 25: Identification Screen

1 To control logos (see section 9￿ .2.1), check information (see section 9￿ .2.2), as well as loading a logo from a floppy disk (see section 10￿ .2.2.1)

23