Kramer Electronics VA-2002 Technical Specifications, Includes the technical specifications

Page 31

Technical Specifications

4.Press the UP and DOWN buttons to access the specific Preferences screen that you require.

The screens that display the Preferences appear in the following order:

￿￿Video input source (select composite video or s-Video)

￿￿Video standard (select PAL or NTSC)

￿￿Monitor Out Configuration (select to use as control, or to use as monitor)

￿￿Lock1 (to lock the front panel, press the OK button twice; to unlock the front panel, simultaneously press both the UP and DOWN buttons)

￿￿Upload Software1 (to download an upgrade to Flash memory, insert the floppy disk with the new operating system in the floppy disk drive2 and press the OK button. Press the DOWN button and then the OK button again (choosing Yes))

11 Technical Specifications

Table 4 includes the technical specifications:

Table 4: Technical Specifications3 of the VA-2002 Multistandard Logo Generator

INPUTS:

1 CV, 1Vpp/75￿

 

1 YC, “Y”=1Vpp/75￿, “C”=0.3Vpp/75￿

OUTPUTS:

2 of each: CV, 1Vpp/75￿ and YC, “Y”=1Vpp/75￿, “C”=0.3Vpp/75￿

MAX. OUTPUT LEVEL:

1 Vpp/75￿ CV or “Y”

BANDWIDTH (-3dB):

5.5 MHz, CV or “Y”

DIFF. GAIN:

<2.7%

DIFF. PHASE:

<0.6 deg.

K-FACTOR:

<1.5%

S/N RATIO:

63dB

CONTROLS:

5 front panel buttons, RS-232

COUPLING:

AC

POWER SOURCE:

100-230 VAC, 50/60 Hz, 12VA max.

DIMENSIONS:

19-inch (W), 8.6-inch (D) 1U (H) rack-mountable

WEIGHT:

3.2 kg. (7.1 lbs.)

ACCESSORIES:

Power cord

1 Only available from the front panel, and not from the Preferences tab of the VA-2002 Remote Control Window 2 Item 9 on the front panel in Figure 1

3 Specifications are subject to change without notice

28

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 31
Contents Model Contents Tables FiguresGetting Started IntroductionQuick Start Getting Started Your VA-2002 Multistandard Logo Generator OverviewVA-2002 Multistandard Logo Generator Front Panel VA-2002 Multistandard Logo Generator Features Before Installing on a Rack Installing the VA-2002 on a RackConnecting the VA-2002 Multistandard Logo Generator Connecting the VA-2002 Multistandard Logo Generator Click Install/Remove Software. The Welcome window appears Installing the VA-2002 SoftwareClick Next Start Menu window appears, as illustrates Installation Window VA-2002 Logo Finalizer and Upload Program Toolbar Buttons Using the VA-2002 Logo Finalizer and Upload ProgramHeight Logo Graphics Characteristics and LimitationsUnnamed VA-2000 Window Saving a Logo to a Floppy DiskSelecting a Bitmap File Solid Logo on the Center Right Side of the Screen Transparent Logo on the Center Right Side of the Screen Adding Transparency to a LogoSet Transparency Box Setting the Fade SpeedConfiguring the Remote Control Program Using the VA-2002 Remote Control ProgramCOM-Port Window Transferring a Logo via RS-232 Controlling the VA-2002 from the Remote Control ProgramLogo Info Window Before RS-232 Transfer Identification and Status Screens Operating via the VA-2002 Front PanelSEL Logo Accessing the Main MenuEditing a Logo from the Main Menu Deleting a Logo from the Main Menu Checking System Information from the Main Menu Includes the technical specifications Technical SpecificationsOnly the first purchase customer may enforce this warranty 2900-006017 REV