Kramer Electronics VA-2002 user manual Accessing the Main Menu, SEL Logo

Page 27

Operating via the VA-2002 Front Panel

After a few seconds the Status Screen appears, indicating whether the logo is switched On or Off1, the name of the logo, and if a video signal is present2.

STATUS ON

---------------------

“Kramer”

Figure 26: Status Screen

10.2Accessing the Main Menu

From the Main Menu, you can3:

￿￿Select a logo (see section 10￿ .2.1)

￿￿Edit a logo (see section 10￿ .2.2)

￿￿Check the System Information (see section 10￿ .2.3)

￿￿Set the Preferences (see section 10￿ .2.4)

10.2.1Selecting a Logo from the Main Menu

To select a logo from the Main Menu:

1.Press the OK button or the ESC button.

The Main Menu appears, as Figure 27 illustrates.

MAIN MENU

---------------------

Select Logo

￿

Figure 27: Main Menu (Select Logo) Screen

2.Press the OK button.

The name of the currently selected logo appears with an asterisk before it, as Figure 28 illustrates.

SEL LOGO

---------------------

*Kramer￿

Figure 28: Select Logo Screen

1 Press the INSERT button to toggle between logo On and logo Off

2 When no video signal is present, the message * no input signal! * appears alternately with the name of the logo 3 Press the ESC button to return to the Main Menu at any time

24

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 27
Contents Model Contents Tables FiguresIntroduction Getting StartedQuick Start Getting Started Your VA-2002 Multistandard Logo Generator OverviewVA-2002 Multistandard Logo Generator Front Panel VA-2002 Multistandard Logo Generator Features Before Installing on a Rack Installing the VA-2002 on a RackConnecting the VA-2002 Multistandard Logo Generator Connecting the VA-2002 Multistandard Logo Generator Click Install/Remove Software. The Welcome window appears Installing the VA-2002 SoftwareClick Next Start Menu window appears, as illustrates Installation Window VA-2002 Logo Finalizer and Upload Program Toolbar Buttons Using the VA-2002 Logo Finalizer and Upload ProgramHeight Logo Graphics Characteristics and LimitationsUnnamed VA-2000 Window Saving a Logo to a Floppy DiskSelecting a Bitmap File Solid Logo on the Center Right Side of the Screen Transparent Logo on the Center Right Side of the Screen Adding Transparency to a LogoSet Transparency Box Setting the Fade SpeedConfiguring the Remote Control Program Using the VA-2002 Remote Control ProgramCOM-Port Window Transferring a Logo via RS-232 Controlling the VA-2002 from the Remote Control ProgramLogo Info Window Before RS-232 Transfer Identification and Status Screens Operating via the VA-2002 Front PanelSEL Logo Accessing the Main MenuEditing a Logo from the Main Menu Deleting a Logo from the Main Menu Checking System Information from the Main Menu Includes the technical specifications Technical SpecificationsOnly the first purchase customer may enforce this warranty 2900-006017 REV