Kramer Electronics user manual Front Panel VA-2002 Multistandard Logo Generator Features

Your VA-2002 Multistandard Logo Generator

Table 1: Front Panel VA-2002 Multistandard Logo Generator Features

#			Feature			Function
1	POWER Switch				Illuminated switch for turning the unit ON or OFF
2	LCD Display Screen				Displays relevant data (default) or the Main Menu (when the OK
					button or the ESC button are pressed)
3		Button			Moves up one step in the LCD display screen
4		Button			Moves down one step in the LCD display screen
5	OK Button				Press to confirm a command
6	ESC Button				Press to stop the execution of a command
7	INSERT Button				Press to turn the logo On or Off1
8	Floppy Disk Drive Green LED				Lights when reading data from a floppy disk
9	Floppy Disk Drive				Insert a floppy disk in the floppy disk drive to transfer a logo
		Table 2: Rear Panel VA-2002 Multistandard Logo Generator Features
#				Feature		Function
10	RS-232DB 9 Connector					Connects to PC or Serial Controller
11	MONITOR			CV BNC Connector		Connects to the composite video monitor2
12				Y/C 4p Connector		Connects to the s-Video monitor2
13	OUTPUT			CV BNC Connector		Connects to the composite video acceptor
14				Y/C 4p Connector		Connects to the s-Video acceptor
15	INPUT			CV BNC Connector		Connects to the composite video source
16				Y/C 4p Connector		Connects to the s-Video source
17	Power Connector with FUSE					AC connector enabling power supply to the unit

1 When displaying the logo, the INSERT button illuminates (after blinking momentarily)

2 When previewing a logo at a local monitor (composite video and/or s-Video), the logo only appears at these MONITOR outputs, and not at the OUTPUT connectors. You can set the MONITOR outputs to function as an additional pair of OUTPUT connectors (see section 9￿ .1)

5