Adjusting the Clamping Mechanism

The clamps are pre-set at the factory and should not need any adjustment. However, if adjustment is needed remove the stud (A, Fig. 24). Loosen the locking handle and slide the headstock, tailstock or tool rest to the edge of the bed and slightly turn the hex nut (B, Fig. 24). Slide back into position and test the handle to make sure it securely locks.

Changing the Belt and Bearings

Changing the belt and bearings can be a difficult task, and should be performed by a JET authorized repair station. Remove the headstock and take it into a repair station for servicing.

1.Disconnect the machine from the power source!

2.Loosen the locking handle (C, Fig. 25), and lift up on the tensioning handle (D, Fig. 25) to remove tension from the poly v-belt.

3.Open the door (E, Fig. 25), and remove the belt (F, Fig. 25) from the lower pulley.

4.Loosen the two setscrews in the handwheel (G, Fig. 25) and remove.

5.Loosen the socket head cap screw enough to unthread the clamping nut (H, Fig. 25).

6.Loosen the two setscrews in the right hand pulley (I, Fig. 25).

7.Loosen the setscrew in the collar (J, Fig. 26)

8.Use a wood dowel, or aluminum stock to knock the spindle towards the tailstock. Use a material that is softer than the spindle so you do not mushroom the end of the spindle. Only go far enough to remove the belt from the spindle; see Figure 26.

9.Now you can replace the belt or bearings. There are two bearings, #5 and 10, that can be seen in “Headstock Assembly” on page 24.

10.To reassemble, reverse the procedure. Note: When reinstalling the clamping nut, thread it onto the spindle until its snug. Then back it off slightly and tighten the socket head cap screw.

JWL-1642EVS-2, JWL-1642EVS specifications

The Jet Tools JWL-1642EVS and JWL-1642EVS-2 are standout lathes in the realm of woodturning, designed for both novice and seasoned woodworkers. These lathes offer unmatched versatility and precision, making them ideal for a wide variety of turning projects, from simple spindles to complex bowls.

One of the most notable features of the JWL-1642EVS is its powerful 1.5 HP motor that delivers excellent torque across a wide range of RPMs. This enhanced performance allows users to work with various wood species while maintaining smooth operation, a critical factor for achieving a high-quality finish. The electronic variable speed (EVS) control system provides convenient adjustments, allowing artisans to select the optimal speed for their specific turning needs. With a speed range from 40 to 3,600 RPM, craftspeople can effortlessly switch between fine detail work and aggressive stock removal.

The lathe's robust design is complemented by a cast iron bed that minimizes vibrations and ensures stability during operation. This construction not only enhances durability but also contributes to precise results, allowing users to create intricate designs without worrying about inconsistencies in the finish. Additionally, the JWL-1642EVS-2 variant offers an even larger capacity, with an impressive 16-inch swing over the bed and 42-inch length, accommodating larger workpieces.

Furthermore, both models feature a convenient electronic spindle lock, making the process of changing chucks and accessories quick and efficient. The adjustable swivel headstock allows for greater flexibility in accessing various angles, providing users with more control and comfort during operation.

Safety is also a priority in the design of the JWL-1642EVS and JWL-1642EVS-2, with features such as a safety restart switch, ensuring that the lathe cannot restart unexpectedly after a power interruption. Easy-to-read digital readouts for speed settings further enhance user experience by allowing for precise monitoring while turning.

Overall, the Jet Tools JWL-1642EVS and JWL-1642EVS-2 combine advanced technology, durable construction, and user-friendly features, making them indispensable tools for any woodturner looking to expand their craft and achieve professional-quality results. Whether you’re creating functional items or artistic pieces, these lathes empower users to elevate their woodturning endeavors.