Delta 36-650 instruction manual Operating Controls and Adjustments, Starting Stopping SAW

Page 19

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND

STOPPING SAW

1.The on/off switch is located underneath the switch shield (A) Fig. 54. To turn the saw “ON,” move switch trigger (B) to the up position.

2.To turn the saw “OFF,” push down on switch shield

(A) Fig. 55.

LOCKING SWITCH IN

THE “OFF” POSITION

IMPORTANT: When the tool is not in use, the switch (B) Fig.56, should be locked in the OFF position using a padlock (C), with a 3/16" diameter shackle to prevent unauthorized use.

A

B

Fig. 54

A

Fig. 55

C

B

Fig. 56

19

Image 19
Contents Professional Table Saw General Safety Rules Safety Guidelines / DefinitionsAdditional Safety Rules for Table Saws Motor Specifications Power ConnectionsGrounding Instructions Extension Cords Unpacking and CleaningFence Parts Professional Table SAW PartsHardware Stand PartsStand Legs AssemblyStand to SAW Blade Tilting and Raising Handwheel Recommended Motor for Your SAW Installing Switch Motor CordMotor and Motor Mounting Plate to SAW Motor to Motor Mounting PlateMotor PULLEY, Pulley GUARD, and Drive Belt Illustrates the motor cord connected to the switch assembly Connecting Motor Cord to Switch AssemblyBlade Guard and Splitter Assembly Page Extension Wings Guide Rails Switch Assembly RIP Fence to Guide Rails Locking Switch OFF Position Operating Controls and AdjustmentsStarting Stopping SAW Tilting the Blade Raising and Lowering the BladeRIP Fence Operation and Adjustments Miter Gage Operation and Adjustment Overload Protection MaintenanceAdjusting Table Insert Changing the SAW BladeCROSS-CUTTING OperationsRipping Using Accessory Moulding CutterheadAlways Install Blade Guard After Operation is Compete Using Accessory Dado Head Constructing a Featherboard Using Auxiliary Wood Facing on RIP FenceConstructing a Push Stick PushstickPARTS, Service or Warranty Assistance AccessoriesPage Canadian PORTER-CABLE Delta Service Centers