Black & Decker Removing the Blade CS1030L, Secure and maintain work area See Safety Rules

Page 9

642743-00 CS1030 CS1040L 4/13/06 10:06 AM Page 9

REMOVING THE BLADE (CS1030L) (FIG. 12 & 13)

•Prevent spindle rotation by engaging the teeth of the saw blade into a piece of scrap wood.

•Loosen and remove the blade retaining screw (16) by turning it counter- clockwise using the wrench (10) supplied.

•Remove the outer washer (17).

•Remove the saw blade (7).

12

GENERAL CUTS (IMPORTANT: READ SAFETY WARNINGS AND INSTRUCTIONS. )

GUARD AGAINST KICKBACK

With unit unplugged, follow all assembly, adjustment and set up instructions. Make sure lower guard operates. Select the proper blade for the material to be cut.

•Measure and mark work for cutting.

•Support and secure work properly (See Safety Rules and Instructions).

•Use appropriate and required safety equipment (See Safety Rules).

•Secure and maintain work area (See Safety Rules).

•With plug inserted and guard closed, make sure switch turns saw on and off.

WARNING: It is important to support the work properly and to hold the saw firmly to prevent loss of control which could cause personal injury. Figure 3 illustrates recommended hand position.

13

 

 

17

 

18

 

 

 

16

7

 

 

 

10

 

ATTACHING THE BLADE (CS1030L)

•Place the saw blade (7) onto the inner flange (18), making sure that the arrow on the blade points in the same direction as the arrow on the tool.

•Fit the outer washer (17) on the spindle, with the raised part pointing away from the saw blade.

•Insert the blade retaining screw (16) into the hole.

•Prevent spindle rotation by engaging the teeth of the saw blade into a piece of scrap wood.

•Securely tighten the blade retaining screw by turning it clockwise using the wrench (10) supplied.

WARNING: To reduce the risk of serious personal injury, read, understand and follow all important safety warnings and instructions prior to using tool.

ATTACHING AND REMOVING THE RIP FENCE (INCLUDED WITH CS1040L) (FIG. 14)

The rip fence is used to saw in a straight line parallel to the edge of the workpiece.

ATTACHING

•Loosen the locking knob (19).

•Insert the rip fence (20) through the openings (21).

•Slide the rip fence into the desired position.

•Tighten the locking knob.

REMOVING

•Loosen the locking knob.

•Pull the rip fence out of the tool. NOTE: If you do not have a proper fitting fence, use a straight edge guide in contact with the edge of the shoe to improve accuracy of cut and reduce the possibility of binding and kickback.

14

21

19

21

20

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VEA EL Español EN LA Contraportada 4 185mm Circular SawsGeneral Safety Rules Specific Safety Rules SE These Instructions Additional Safety Rules Circular Saws Causes and Operator Prevention of KickbackLead from lead-based paints 642743-00 CS1030 CS1040L 4/13/06 1006 AM Safety Instructions Lasers Guard Against KickbackTo Reduce the Risk of Kickback Assembly / Adjustment SET-UP OverviewMotor Tighten the lever to lock the saw shoe in place Adjusting the Bevel Angle FIGTighten the locking knob to lock the saw shoe in place Attaching and Removing the Blade Removing the Blade CS1040LRemoving the Blade CS1030L Secure and maintain work area See Safety RulesAttaching the Blade CS1030L AttachingOperation Accessories MaintenanceService Information Full TWO-YEAR Home USE WarrantyCenter. This product is not intended for commercial use Technical Specifications of LaserGuide D’UTILISATION Lorsque votre corps est mis à la terre Règles Générales DE SécuritéUtilisation ET Entretien DE L’OUTIL Règles DE Sécurité SpécifiquesPerformances et la sécurité de fonctionnement.V ’OPÉRATEURLe plomb contenu dans les peintures à base de plomb Effets DE RebondPROTÉGEZ-VOUS DES Effets DE Rebond Pour Réduire LE Risque D’EFFET DE Rebond Directives DE Sécurité LasersMoteur Aperçu FIGRéglage DE L’ANGLE DE Biseau Configuration DE ’ASSEMBLAGE ET DES RéglagesRéglage DE LA Profondeur DE Coupe ET Fixation ET Dépose DE LA Lame Dépose DE LA Lame CS1040L ETFournie Assemblage DE LA Lame CS1040L Assemblage DE LA Lame CS1030LDépose DE LA Lame CS1030L ET Mesurer et marquer le bois à découperTrait Laser FonctionnementInterrupteur Réglage DE LA Plaque DE Trait DE Scie FIGPour Utiliser LE Trait Laser Interrupteur DU Laser FIGSciage Conseils Pour UNE Utilisation OptimaleAccessoires EntretienLubrification Caractéristiques Techniques DU Laser 555326-7100 Instrucciones Normas Generales DE SeguridadIncendio o lesiones personales graves.save Seguridad PersonalNormas DE Seguridad Específicas USO Y Cuidado DE LA HerramientaMantenimiento Causas DEL Retroceso Y SU Prevención POR Parte DEL Operador Conserve Estas Instrucciones RetrocesoEl plomo de las pinturas de base plomo Para Reducir EL Riesgo DE Retroceso Manténgase Alerta Y ENInstruccciones DE Seresseguridad Láseres Descripción General FIG Ajuste DE LA Profundidad DE Corte Y ENSAMBLADO/AJUSTEAjuste DEL Ángulo DE Biselado FIG Colocación DE LA Hoja CS1040LColocación DE LA Hoja CS1030L Extracción DE LA Hoja CS1030L YColocación ExtracciónLínea Láser FuncionamientoConsejos Para UN USO Óptimo AserradoCorte Interno Almacenamiento DE LA LlaveGarantía Completa DE DOS Años Para USO EN EL Hogar Disponibles en su comercio minorista localEspecificaciones Técnicas DEL Láser GUADALAJARA, JAL CULIACAN, SIN MONTERREY, N.LPUEBLA, PUE MEXICO, D.F642743-00 CS1030 CS1040L 4/13/06 1006 AM 642743-00 CS1030 CS1040L 4/13/06 1006 AM 642743-00 CS1030 CS1040L 4/13/06 1006 AM

CS1030L specifications

The Black & Decker CS1030L is a powerful and efficient chainsaw designed to meet the needs of both novice users and seasoned professionals. It combines cutting-edge technology with user-friendly features, making it an excellent tool for various yard work tasks, including pruning, trimming, and cutting down small to medium-sized trees.

One of the key features of the CS1030L is its 10-inch cutting bar, which allows users to tackle a wide range of cutting jobs with ease. The chainsaw is powered by a robust 20V max lithium-ion battery, providing cordless convenience without compromising on power. The battery technology ensures extended runtime and faster charging, enabling users to complete their tasks without frequent interruptions.

Another notable aspect of the CS1030L is its lightweight design, weighing significantly less than many traditional gas-powered chainsaws. This makes it easy to maneuver, reducing user fatigue during extended use. The tool's ergonomic handle is designed for comfort and stability, providing a secure grip that enhances user control and precision while cutting.

Black & Decker has integrated several safety features into the CS1030L to ensure a secure experience. The chainsaw is equipped with a safety switch that prevents accidental start-ups, and a hand guard to protect users from debris. The automatic oiling system also ensures that the chain remains properly lubricated, which enhances cutting performance and extends the life of the chain and bar.

In terms of maintenance, the CS1030L is user-friendly, featuring a tool-free chain tensioning system that allows for quick adjustments and replacements. This efficient feature makes it easy to keep the chainsaw in optimal working condition without needing additional tools.

Additionally, the chainsaw is designed for low noise operation, making it an excellent choice for residential areas where sound reduction is a priority. The combination of its eco-friendly electric power and minimal emissions makes the CS1030L an attractive option for environmentally conscious users.

Overall, the Black & Decker CS1030L is a practical and versatile chainsaw that delivers performance and reliability. With its advanced technologies, user-friendly features, and safety enhancements, it stands out as a top choice for homeowners and DIY enthusiasts looking to efficiently maintain their outdoor spaces.
Top Page Image Contents