General Safety Rules

642743-00 CS1030 CS1040L 4/13/06 10:06 AM Page 2

WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

•Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized

outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

•Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

•Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

•When operating a power tool

outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock.

Minimum Gage for Cord Sets

Volts		Total Length of Cord in Feet
120V		0-25	26-50	51-100	101-150
240V		0-50	51-100	101-200	201-300
Ampere Rating			AWG
More	Not more		AWG
Than	Than

0 -	6	18	16	16	14
6 -	10	18	16	14	12
10-	12	16	16	14	12
12-	16	14	12	Not Recommended

Personal Safety

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury,

•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents cover moving parts and should be avoided.

•Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

•Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

•Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

•Use clamps or other practical way to secure and support the workpiece

CS1030L specifications

The Black & Decker CS1030L is a powerful and efficient chainsaw designed to meet the needs of both novice users and seasoned professionals. It combines cutting-edge technology with user-friendly features, making it an excellent tool for various yard work tasks, including pruning, trimming, and cutting down small to medium-sized trees.

One of the key features of the CS1030L is its 10-inch cutting bar, which allows users to tackle a wide range of cutting jobs with ease. The chainsaw is powered by a robust 20V max lithium-ion battery, providing cordless convenience without compromising on power. The battery technology ensures extended runtime and faster charging, enabling users to complete their tasks without frequent interruptions.

Another notable aspect of the CS1030L is its lightweight design, weighing significantly less than many traditional gas-powered chainsaws. This makes it easy to maneuver, reducing user fatigue during extended use. The tool's ergonomic handle is designed for comfort and stability, providing a secure grip that enhances user control and precision while cutting.

Black & Decker has integrated several safety features into the CS1030L to ensure a secure experience. The chainsaw is equipped with a safety switch that prevents accidental start-ups, and a hand guard to protect users from debris. The automatic oiling system also ensures that the chain remains properly lubricated, which enhances cutting performance and extends the life of the chain and bar.

In terms of maintenance, the CS1030L is user-friendly, featuring a tool-free chain tensioning system that allows for quick adjustments and replacements. This efficient feature makes it easy to keep the chainsaw in optimal working condition without needing additional tools.

Additionally, the chainsaw is designed for low noise operation, making it an excellent choice for residential areas where sound reduction is a priority. The combination of its eco-friendly electric power and minimal emissions makes the CS1030L an attractive option for environmentally conscious users.

Overall, the Black & Decker CS1030L is a practical and versatile chainsaw that delivers performance and reliability. With its advanced technologies, user-friendly features, and safety enhancements, it stands out as a top choice for homeowners and DIY enthusiasts looking to efficiently maintain their outdoor spaces.