Read all Instructions

•Do not operate charger with damaged cord or plug — have them replaced immediately.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

•Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

•NEVER attempt to connect 2 chargers together.

•The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage.

SAVE THESE INSTRUCTIONS Important Safety Instruction for Battery Packs

WARNING: For safe operation, read this manual and manuals originally supplied with tool before using the charger.

The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.

• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when battery packs are burned.

• Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for Lithium-Ion batteries is composed of a mixture of liquid organic carbonates and lithium salts.

• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

• Charge the battery packs only in Black & Decker chargers.

• DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.

• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚C) (such as outside sheds or metal buildings in summer). WARNING: Never attempt to open the battery pack for any reason. If battery pack

case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling.

WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE: Lithium-Ion batteries should not be put in checked baggage.

Storage Recommendations

1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold.

2. Long storage will not harm the battery pack or charger.

Charging Procedure

Black & Decker chargers are designed to charge

Black & Decker battery packs in 3-4 hours depending on the pack being charged.

1. Plug the charger into an appropriate outlet before inserting the battery pack.

2. Insert the battery pack into the charger as shown in figure A.

3. The green LED will flash indicating that the battery is being charged.

PSL12 specifications

The Black & Decker PSL12 is a powerful and versatile 12-volt cordless screwdriver designed to make various DIY projects and tasks easier and more efficient. It is ideal for both home improvement enthusiasts and professionals alike, providing a convenient solution for fastening screws and assembling furniture.

One of the standout features of the PSL12 is its compact and lightweight design. Weighing in at just over 1 pound, this tool is easy to maneuver and can be operated with one hand, making it perfect for tasks that require precision and control in tight spaces. The ergonomic handle ensures a comfortable grip, reducing fatigue during extended use.

The PSL12 operates on a 12-volt lithium-ion battery, which offers sufficient power to tackle a wide range of applications. Lithium-ion technology provides a consistent level of performance and does not suffer from memory effect, allowing users to recharge the battery at any time without worrying about reducing its lifespan. The battery typically delivers a longer runtime compared to standard nickel-cadmium batteries, enabling users to complete their projects without frequent interruptions.

Another notable feature is its variable speed control, which allows users to adjust the speed setting to suit different materials and tasks. This flexibility is essential for achieving the desired torque when driving screws into various substrates, including wood, metal, and plastic. The built-in LED work light illuminates dark or confined spaces, ensuring visibility during tasks, even in dimly lit areas.

The PSL12 is equipped with a magnetic bit holder, which facilitates quick and effortless bit changes. This feature is particularly useful when transitioning between different jobs or projects, saving time and effort. The tool also includes a reverse switch, allowing for easy removal of screws and providing greater control during operation.

Moreover, the Black & Decker PSL12 boasts a durable construction designed to withstand the rigors of everyday use. This reliability, combined with its excellent performance and user-friendly features, makes it a popular choice among DIY enthusiasts and professionals seeking a dependable cordless screwdriver.

Overall, the Black & Decker PSL12 combines power, portability, and convenience, making it an essential tool for a variety of projects. Whether assembling furniture, installing fixtures, or performing general repair tasks, the PSL12 delivers the performance and reliability users need to get the job done efficiently.