Leaving the battery in the charger

4.The completion of charge is indicated by the green LED remaining on continuously.

The pack is fully charged and may be used at this time or left on the charger.

Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use.

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3. If the battery pack does not charge properly:

a. Check current at receptacle by plugging in a lamp or other appliance

b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c. Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d. If charging problems persist, take the tool, battery pack and charger to your local service center.

4. The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6. Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery

pack breaks or cracks, return to a service center for recycling.

This Class B digital apparatus complies with Canadian ICES-003. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

. Reorient or relocate the receiving antenna.

. Increase the separation between the equipment and the receiver.

. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

. Consult the dealer or an experienced radio/TV technician for help.

assembly instructions

Installing and Removing the Battery

Pack From the Tool

WARNING: Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

PSL12 specifications

The Black & Decker PSL12 is a powerful and versatile 12-volt cordless screwdriver designed to make various DIY projects and tasks easier and more efficient. It is ideal for both home improvement enthusiasts and professionals alike, providing a convenient solution for fastening screws and assembling furniture.

One of the standout features of the PSL12 is its compact and lightweight design. Weighing in at just over 1 pound, this tool is easy to maneuver and can be operated with one hand, making it perfect for tasks that require precision and control in tight spaces. The ergonomic handle ensures a comfortable grip, reducing fatigue during extended use.

The PSL12 operates on a 12-volt lithium-ion battery, which offers sufficient power to tackle a wide range of applications. Lithium-ion technology provides a consistent level of performance and does not suffer from memory effect, allowing users to recharge the battery at any time without worrying about reducing its lifespan. The battery typically delivers a longer runtime compared to standard nickel-cadmium batteries, enabling users to complete their projects without frequent interruptions.

Another notable feature is its variable speed control, which allows users to adjust the speed setting to suit different materials and tasks. This flexibility is essential for achieving the desired torque when driving screws into various substrates, including wood, metal, and plastic. The built-in LED work light illuminates dark or confined spaces, ensuring visibility during tasks, even in dimly lit areas.

The PSL12 is equipped with a magnetic bit holder, which facilitates quick and effortless bit changes. This feature is particularly useful when transitioning between different jobs or projects, saving time and effort. The tool also includes a reverse switch, allowing for easy removal of screws and providing greater control during operation.

Moreover, the Black & Decker PSL12 boasts a durable construction designed to withstand the rigors of everyday use. This reliability, combined with its excellent performance and user-friendly features, makes it a popular choice among DIY enthusiasts and professionals seeking a dependable cordless screwdriver.

Overall, the Black & Decker PSL12 combines power, portability, and convenience, making it an essential tool for a variety of projects. Whether assembling furniture, installing fixtures, or performing general repair tasks, the PSL12 delivers the performance and reliability users need to get the job done efficiently.