Cisco Systems MC-607 manual Reestablishing DOCSIS-Compliant Bridging, MC-647

Configuring Subscriber-End Broadband Access Router Features

Reestablishing DOCSIS-Compliant Bridging

Verifying Bridging

To verify that routing has been disabled on all interfaces and that bridging has been reenabled, enter the show startup-configcommand in privileged EXEC mode:

uBR924# show startup-configBuilding configuration...

Current configuration:

!

version 12.1 service config no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

!

hostname uBR924

!

clock timezone - 4 ip subnet-zero

no ip routing

!

voice-port 0

!

voice-port 1

!

interface Ethernet0 no ip address

no ip directed-broadcast no ip route-cache bridge-group 59

bridge-group 59 spanning-disabled

!

interface cable-modem0 no ip address

no ip directed-broadcast no ip route-cache

no keepalive

cable-modem downstream saved channel 699000000 36 bridge-group 59

bridge-group 59 spanning-disabled

!

ip classless

!

line con 0 line vty 0 4

login

!

end

Reestablishing DOCSIS-Compliant Bridging

To erase the current cable access router configuration and return the unit to its factory default DOCSIS-compliant bridging configuration, use the following command in privileged EXEC mode:

Command	Purpose
uBR924# erase startup config	Erases the current configuration (assuming the current running
	configuration has been saved to NVRAM).
	Cisco IOS Multiservice Applications Configuration Guide

MC-647