Cisco Systems MC-607 manual VoIP Bridging Using Sgcp Configuration Example, MC-656

Configuring Subscriber-End Broadband Access Router Features

Subscriber-End Broadband Access Router Configuration Examples

ip classless

ip route 0.0.0.0 0.0.0.0 24.3.90.2 access-list 1 permit any

!

line con 0 line vty 0 4

login

!

end

VoIP Bridging Using SGCP Configuration Example

In this example, Cisco uBR924 is configured to support VoIP in bridging mode using SGCP. Note the following in the sample configuration file:

•SGCP is enabled.

•The call agent IP address is specified.

•The SGCP application is specified for each port.

To configure this application via DHCP, the following fields must also be set:

•Host name

•Domain name

•Domain Name System (DNS) server

•Merit dump file — S:0:<call agen FQDN>:S:1<call agent FQDN>

Current configuration:

!

!Last configuration change at 16:30:00 - Thu Dec 16 1999

version 12.1 no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

hostname art1

clock timezone - 0 6 ip subnet-zero

no ip routing

ip domain-name cisco.com ip name-server 4.0.0.32

sgcp

xgcp snmp sgcp

voice-port 0

voice-port 1

dial-peer voice 100 pots application SGCPAPP port 0

dial-peer voice 101 pots

Cisco IOS Multiservice Applications Configuration Guide

MC-656