Cisco Systems MC-607 manual VoIP Bridging Using H.323v2 Configuration Example, MC-653

Page 47

Configuring Subscriber-End Broadband Access Router Features

Subscriber-End Broadband Access Router Configuration Examples

cable-modem downstream saved channel 477000000 56 no cable-modem compliant bridge

!

!

router rip version 2 network 24.0.0.0

network 10.0.0.0

!

ip classless

no ip http server

!

line con 0 transport input none

line vty 0 4

!

end

VoIP Bridging Using H.323v2 Configuration Example

In this example, the Cisco uBR924 is configured for bridging, with an H.323v2 dial peer to another Cisco uBR924 attached to the same downstream interface on the headend CMTS.

Current configuration:

!

!Last configuration change at 21:54:41 - Thu Dec 16 1999

!NVRAM config last updated at 21:56:20 - Thu Dec 16 1999

version 12.1 no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

hostname 2007

clock timezone - 3 ip subnet-zero

no ip routing

voice-port 0 input gain -3

voice-port 1 input gain -3

dial-peer voice 1 pots destination-pattern 6501 port 0

dial-peer voice 2 pots destination-pattern 6502 port 1

dial-peer voice 62 voip destination-pattern 620. session target ipv4:10.1.71.62

interface Ethernet0

ip address 10.1.71.65 255.255.255.0 no ip directed-broadcast

Cisco IOS Multiservice Applications Configuration Guide

MC-653

Image 47

Contents MC-607 Configuring Subscriber-End Broadband Access Router FeaturesMC-608 Cisco IOS Software Feature SetsSubscriber-end Overview MC-609 Base IP Bridging Feature SetHome Office Easy IP Feature Set MC-610 Small Office Feature SetTelecommuter Feature Set MC-611 Operating ModesMC-612 Data SpecificationsDescription Downstream Values Upstream Values MC-613 Service AssignmentsMC-614 Downstream and Upstream Data TransferBridging Applications MC-615 Routing ApplicationsNetwork Address Translation and Port Address Translation L2TP ProtocolEasy IP Dhcp ServerMC-617 Voice over IP OperationsSimplified VoIP over Cable Network MC-618MC-619 Voice Compression and DecompressionMC-620 Protocol StackMC-621 Subscriber-End Broadband Access Router Voice SpecificationsSgcp Protocol Stack Metric ValueMC-622 Backup Pots ConnectionMC-623 Docsis Baseline PrivacyIPSec Network Security MC-624 Triple Data Encryption StandardFirewall NetRanger Support-Cisco IOS Intrusion DetectionMC-625 Subscriber-End Broadband Access Router Configuration OptionsMC-626 MC-627 Event DescriptionMC-628 Sequence Event DescriptionMC-629 MC-630 MC-631 Cable Modem Initialization FlowchartMC-632 Subscriber-End Broadband Access Router Basic TroubleshootingWaitforlinkupstate MC-633UBR924# show controllers cable-modem 0 mac ? MC-634MC-635 Event 1-Wait for the Link to Come UpEvent 2-Scan for a Downstream Channel, then Synchronize MC-636 Event 4-Start Ranging for Power AdjustmentsEvent 3-Obtain Upstream Parameters MC-637 Event 5-Establish IP ConnectivityEvent 9-Perform Registration Event 6-Establish the Time of DayEvent 7-Establish Security Event 8-Transfer Operational ParametersMC-639 Event 11-Enter the Maintenance StateEvent 10-Comply with Baseline Privacy MC-640 Subscriber-End Broadband Access Router Configuration TasksMC-641 Configuring a Host Name and PasswordCommand Purpose MC-642 Configuring Ethernet and Cable Access Router InterfacesMC-643 Configuring RoutingMC-644 Verifying RoutingMC-645 Configuring BridgingMC-646 MC-647 Reestablishing DOCSIS-Compliant BridgingMC-648 Verifying DOCSIS-Compliant BridgingMC-649 Customizing the Cable Access Router InterfaceUsing Multiple PCs with the Cable Access Router MC-650 Basic Internet Access Bridging Configuration ExampleMC-651 Basic Internet Access Routing Configuration ExampleMC-652 IP Multicast Routing Configuration ExampleMC-653 VoIP Bridging Using H.323v2 Configuration ExampleMC-654 VoIP Routing Using H.323v2 Configuration ExampleMC-655 NAT/PAT Configuration ExampleMC-656 VoIP Bridging Using Sgcp Configuration ExampleMC-657 IPSec Configuration ExampleMC-658 L2TP Configuration ExampleMC-659 MC-660