Cisco Systems ASR 901 10G Attaching Brackets for Wall-Mounting, Mounting the Router on a Wall

Chapter 3 Installing the Cisco ASR 901 10G Router

Mounting the Cisco ASR 901 10G Router

Attaching Brackets for Wall-Mounting

Perform the steps given below to attach brackets on the router for wall-mounting.

Step 1 Locate the mounting holes of the router.

Step 2 Align the wall-mounting bracket with the router and position with the four Number 6-32 x 0.25-inch screws (provided). See Figure 3-5.

Step 3 Insert the screws (in four places) and tighten using a Number 2 Phillips screwdriver (on each side).

Step 4 Position the router in the equipment rack lining up the bracket holes on the router with the holes on the rack and secure with four Number 6-32 x 0.25-inch mounting screws (two on each side).

Step 5 Tighten the screws using a 1/4-inch flat-blade screwdriver (on each side).

Figure 3-5 Attaching 19-inch Bracket to Wall-Mount the Router

1

Phillips truss-head screws

2

—

Mounting the Router on a Wall

The router can be wall mounted with the ports either facing up or down. The illustration used in the procedure below uses the orientation of ports facing upwards.

Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide

3-8 OL-28105-02