Cisco Systems ASR 901 10G manual DC power cord

Chapter 3 Installing the Cisco ASR 901 10G Router

Mounting the Cisco ASR 901 10G Router

Step 1 In the accessory kit, locate the two cable holders and the two pan-head Phillips head screws used to attach the cable holders to the router. (part number of cable holder is 52-0685-01.)

Step 2 Set the parts aside.

Step 3 Insert the DC power cord through the cable holder. See Figure 3-11. Repeat this step for the second DC power cord.

Figure 3-11 Inserting the DC Power Cord Through Cable Holder

2

1

1DC power cord

334572

2Cable holder

Step 4 Use a Phillips head screwdriver to attach the cable holders to the front of the router with the two screws from the accessory kit. See Figure 3-12.

Figure 3-12 Attaching Cable Holder to the Router

334521

2 1 3 3 1 2

1

3

Cable holder	2	DC power cord
DC terminal	4	—

	Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
3-14	OL-28105-02