Stowtrak 20 SAW General Information | Stow MS2050E1, MS2090HP

STOWTRAK 20 SAW — GENERAL INFORMATION

TRAK 20 Masonry Saw

The TRAK 20 masonry saw is designed for vigorous wet-cutting masonry applications.The heavy-duty steel conveyor cart and ball bearing roller wheels ensure material stability and smooth travel. In addition a reinforced jig-welded steel frame provides rigidity for cutting accuracy and long service life.

This saw is available with either an electric motor or a gasoline engine. Two heavy duty electric motors are available: a 5 HP 230V single phase or 5 HP 230V three phase, all with overload protectiom.

If desired, the TRAK 20 saw can be configured with a 9.0 HP Honda GX270 gasoline engine.

All TRAK 20 models include a high flow water pump, cutting jig, water hoses and associated plumbing to enable the operator to begin wet cutting.

Dry Cutting Applications

The TRAK 20 masonry saw is shipped from the factory for wet- cutting saw applications, however it can be used for dry-cutting saw applications (see dry-cutting saw applications in this manual).The most important thing to remember is to disconnect the water pump.The water pump is cooled by the flow of water, and failure to disconnect the pump (when running dry) will cause pump failure. NEVER! have the water pump engaged when dry cutting applications are involved.

Blade Applications

This saw has been designed to incorporate the use of diamond blades as the cutting tool.The optimum performance of this saw is best evidenced by using 20-inch (508 mm) diamond blades that match the material being cut. Ask your dealer, or call STOW about your specific cutting application.

Overview of Features

■5 HP, 230VAC , 60 Hz heavy duty electric motors with overload protection.

■9 HP Honda GX270 gasoline engine.

■20-inch blade capacity provides 5-inch depth of cut.

■Rugged steel conveyor cart for optimum stability.

■Open back design permits capability of cutting large materials.

■Ergonomically designed cutting head provides operator relief in high tempo operations.

■Welded fork pockets for easy transportation.

■Rubber-matted cutting table helps hold the material being cut in place while resisting vibrations for smoother cuts with less chipping.

■Cutting table marked in inches (ruler) for precision cuts.

■Stay-level blade guard for operator safety.

■Rigid steel frame minimizes vibrations and assures accurate cutting.

■Mechanical Water Pump Kit (Gasoline Model Only)

■Electric Submersible Water Pump Kit (Electric Models Only).

PAGE 14 — STOW TRAK-20 SAW — OPERATIONS MANUAL — REV. #1 (06/16/04)