Chapter 2 – Installing and Cabling the
MultiVOIP
The MVP210 MultiVOIP models are tabletop units. The MVP410 and MVP810 MultiVOIPs are heavier units. As such two or more people need to install these units into racks. Read the safety notices before beginning installation.
Safety Warnings
Lithium Battery Caution
A lithium battery on the voice/fax channel board provides backup power for the timekeeping capability. The battery has an estimated life expectancy of ten years. When the battery starts to weaken, the date and time may be incorrect. If the battery fails, the board must be sent back to Multi‐Tech Systems for replacement.
Warning: There is danger of explosion if the battery is incorrectly replaced.
Safety Warnings Telecom
1.Never install telephone wiring during a lightning storm.
2.Never install a telephone jack in wet locations unless the jack is specifically designed for wet locations.
3.This product is to be used with UL and UL listed computers.
4.Never touch un‐insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
5.Use caution when installing or modifying telephone lines.
6.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.
7.Do not use a telephone in the vicinity of a gas leak.
8.To reduce the risk of fire, use only a UL‐listed 26 AWG or larger telecommunication line cord.
Unpacking Your MultiVOIP
When unpacking your MultiVOIP, check the package’s contents. The contents can differ according to model. If any items are missing, contact Multi‐Tech Technical Support.
MVP210 models content list
●MVP210
●DB9 to RJ45 cable
●Power transformer
●Power cord
●Printed cabling guide
MultiVOIP® Voice/Fax over IP Gateways | 9 |
