Chapter 4 – Configuring Your MultiVOIP
●The Channel type corresponding to that Inbound phone book entry has to be FXS on the Interface window.
●The Message Waiting Indication has to be either Light or Stutter Dial Tone on the Interface Parameters window.
The password on the Interface window is used for that particular channel when a “SUBSCRIBE” request is sent; that is, if the MultiVOIP gets a 401/407 response from a subscribe request. It then uses the configured password, calculates the response, and resends the “SUBSCRIBE” request.
FXO Parameters
The parameters that apply to the FXO telephony interface type are shown in the figure and described in the table that follows.
48 | MultiVOIP® Voice/Fax over IP Gateways |
