Chapter 4 – Configuring Your MultiVOIP
The table that follows describes the fields of the RADIUS window.
|
|
Field Name | Values |
|
|
Enable Accounting | Y/N |
|
|
Server Address | n.n.n.n |
|
|
Accounting Port | 1 ‐ 65535 |
|
|
Retransmission |
|
Interval |
|
|
|
Number of | 0 ‐ 255 |
Retransmissions |
|
|
|
Shared Secret | alpha‐numeric |
|
|
Select Attributes | ‐‐ |
(button) |
|
|
|
RADIUS Window Field Definitions
Description
When checked, the MultiVOIP accesses the accounting functions of the RADIUS server.
IP address of the RADIUS server that handles accounting (billing) for the current MultiVOIP unit.
TDM time slot at which RADIUS accounting information is transmitted and received.
If the MultiVOIP sends out a packet to the RADIUS server and doesn't receive a response in the retransmit interval, it retransmits that packet again and waits the retransmit interval again for a response. How many times it does this is determined by the setting in the Number of Retransmissions field.
Client encryption key for the current VOIP unit.
Gives access to RADIUS Attributes window. On Attributes window, one can specify the parameters to be tallied by the RADIUS server for accounting (usually billing) purposes.
A secondary RADIUS dialog box, RADIUS Attributes, helps you customize accounting information that the MultiVOIP sends to the RADIUS server. The MultiVOIP software logs data about many aspects of the call traffic going through the MultiVOIP. The RADIUS Attributes window lets you select the items to include in the accounting reports sent to the RADIUS server.
“RADIUS Attributes” Definitions
Field |
| Description |
| Field |
| Description | ||
|
|
|
|
|
|
|
|
|
Select All |
| Log report to include all fields |
| Start Date, Time |
| Date and time the phone call began. | ||
|
| shown. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Voice or fax. |
Channel |
| Data channel carrying call. |
| Call Mode |
| |||
Number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Duration |
| Length of call. |
| Packets Received |
| Total packets received in call. | ||
|
|
|
|
|
|
|
| Total bytes received in call. |
Packets Sent |
| Total packets sent in call. |
| Bytes Received |
| |||
|
|
|
|
|
|
|
|
|
Bytes Sent |
| Total bytes sent in call. |
| Coder |
| Voice Coder /Compression Rate used for call is | ||
|
|
|
|
|
|
|
| listed in log. |
|
|
|
|
|
|
|
| When selected, the phonebook prefix matched |
Packets Lost |
| Packets lost in call. |
| Prefix Matched |
| |||
|
|
|
|
|
|
|
| in processing the call is listed in log. |
|
|
|
|
|
|
|
|
|
Outbound |
| DTMF digits received by this |
| Call Status |
| Successful or unsuccessful. | ||
Digits Sent |
| gateway from remote gateway (if |
|
|
|
|
|
|
|
| that DTMF set to "Out of Band"). |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Server Details |
| The IP address of the traffic control server being used is displayed here if the call is handled through that | ||||||
|
| server. The Options field refers to non‐mandatory server features that might be activated. For example, with | ||||||
|
| H.323, various H.323 Version 4 options might be listed. |
|
| ||||
|
|
|
|
|
|
|
| |
|
| From Details |
|
|
|
| To Details | |
|
|
|
|
|
| |||
Gateway | Originating gateway |
| Gateway |
| Completing or answering gateway | |||
Number |
|
|
|
| Name |
|
|
|
|
|
|
|
|
| |||
IP Address | IP address where call originated. |
| IP Address |
| IP address where call was completed/answered. | |||
|
|
|
|
|
| |||
Descript | Identifier of where call originated. |
| Descript |
| Identifier of where call was completed/answered. | |||
|
|
|
|
|
| |||
Options | When selected, log does not use Silence |
| Options |
| When selected, log does not use Silence Compression | |||
| Compression and Forward Error |
|
|
| and Forward Error Correction by party answering call. | |||
| Correction by call originator. |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
MultiVOIP® Voice/Fax over IP Gateways | 75 |