Samsung CLX-6250 Or Continue as, Ccc toner cartridge, Ccc toner Not, Compatible, Check guide

Message	Meaning	Suggested solutions
Replace new [ccc]	The indicated toner	• You can choose Stop
toner	cartridge has almost	or Continue as
Replace with new	reached its estimated	shown on the control
[ccc] toner cartridge	cartridge life. The	panel. If you select
	machine might stop	Stop, the printer
	printing.	stops printing and
	Estimated cartridge	you cannot print any
		more without
	life means the
		changing the
	expected or
		cartridge. If you
	estimated toner
		select Continue, the
	cartridge life, which
		printer keeps printing
	indicates the
		but the printing
	average capacity of
		quality cannot be
	print-outs and is
		guaranteed.
	designed pursuant
		Replace the toner
	to ISO/IEC 19798.
	The number of	cartridge for the best
	pages may be	print quality when this
	affected by the	message appears.
	percentage of	Using a cartridge
	image area,	beyond this stage
	operating	can result in printing
	environment,	quality issues. (See
	printing interval,	"Replacing the toner
	media type and	cartridge" on page 2)
	media size. Some	Samsung does
	amount of toner	not recommend
	may remain in the	using
	cartridge even	non-genuine
	when red LED is	Samsung toner
	turns on and the	cartridge such
	printer stops	as refilled or
	printing.	remanufactured
		. Samsung
		cannot
		guarantee
		non-genuine
		Samsung toner
		cartridge's
		quality. Service
		or repair
		required as a
		result of using
		non-genuine
		Samsung toner
		cartridges will
		not be covered
		under the
		machine
		warranty.
		• If the machine stops
		printing, replace the
		toner cartridge (See
		"Replacing the toner
		cartridge" on page 2).
[ccc] toner Not	The toner cartridge you	Install a
Compatible	have installed is not for	Samsung-genuine toner
[ccc] toner cartridge	your machine.	cartridge, designed for
is not compatible.		your machine.
Check guide

Message	Meaning	Suggested solutions
[ccc] toner Not	The toner cartridge is not	Reinstall the toner
Installed	installed or the CRUM	cartridge two or three
[ccc] toner cartridge	(Consumer Replaceable	times. If the problem
is not installed.	Unit Monitor) in the	persists, the toner
Install it	cartridge is not properly	cartridge is not being
	connected.	detected. Call for
		service.
[ccc] Toner Not	The machine cannot	Remove the sealing
Installed	detect a toner cartridge.	tape from the toner
[ccc] Toner is not		cartridge.
installed.		Refer to Quick Install
Remove seal tape &		Guide.
reinstall
Group	You have tried to select a	Use a speed dial
Not Available	group location number	number or dial number
	where only a single	manually using the
	location number can be	number keypad.
	used, such as when
	adding locations for a
	multiple send operation.
Data Read Fail	Time expired while	Try again.
Check USB Memory	reading date.
Data Write Fail	Storing to the USB	Check the available
Check USB Memory	memory failed.	USB memory space.
Door is open.	The door is not securely	Close the door until it
Close it	latched.	locks into place.
Door is open or	The front door is not	Close the front door
Check Transfer belt	securely latched.	until it locks into place.
IP Conflict	The IP address is used	Check the IP address or
This IP address	elsewhere.	obtain a new IP
conflicts with that		address.
of other system
Connection Error	Connection with the	Check the server
	SMTP server failed.	settings and the
		network cable.
Enter Again	You entered an	Enter the correct item
	unavailable item.	again.
Fax memory is	The fax memory is full.	Delete unnecessary fax
almost full		jobs and retransmit after
		more memory becomes
		available. Alternatively,
		split the transmission
		into more than one
		operation.
Fan error	There is a problem in the	Turn the machine off
Error: [aaa]	machine.	and turn it on again. If
Turn off then on		the problem persists,
		call for service.
Fuser error	There is a problem in the	Turn the machine off
Error: [aaa]	machine.	and turn it on again. If
Turn off then on		the problem persists,
		call for service.
Fuser unit Not	The fuser unit is not	Call for service.
Installed	installed.
Fuser unit is not
installed.
Install it

Troubleshooting_ 9