Samsung CLX-6220, CLX-6250 manual Copying both sides of the originals, Setting copy timeout

1.Press (Copy) on the control panel.

2.Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid.

3.Press Menu on the control panel.

4.Press the up/down arrow to highlight Copy Feature and press OK.

5.Press the up/down arrow to highlight WaterMark and press OK.

6.Press the up/down arrow until the binding Message option you want is highlighted and OK.

7.Press the up/down arrow until the binding Pages option you want is highlighted and OK.

8.Press Stop/Clear to return to ready mode.

9.Press Start to begin copying.

Copying both sides of the originals

You can set the machine to print copies on both sides of paper.

The Duplex options may vary between document feeder or scanner glass.

1.Press (Copy) on the control panel.

2.Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid.

3.Press Duplex on the control panel.

4.Press the up/down arrow until the binding option you want is highlighted.

•Off: Prints in normal mode.

•1->2Side Short: Prints pages to be read by flipping like a note pad.

2

3

5

•1->2Side Long: Prints pages to be read like a book.

•2->1Side:Scans both sides of the originals and prints each of one on a separate sheet.

•2->2Side:Scans both sides of the original and prints on both sides of the paper. This function produces exactly the same print out from the originals.

•2->1Side ROT2: Scans both sides of the original and prints each one

on a separate sheet, but the information on the back side of the

printout is rotated 180°.

5.Press OK to save your selection.

6.Start copying a document.

Setting copy timeout

You can set the time the machine waits before it restores the default control panel settings, if you press Start button prior to the control panel restoring to default, the previous job will be reprinted.

1.Press Menu on the control panel.

2.Press the up/down arrow to highlight System Setup and press OK.

3.Press the up/down arrow to highlight Machine Setup and press OK.

4.Press the up/down arrow to highlight Timeout and press OK.

5.Press the up/down arrow until the time setting you want is highlighted.

Selecting Off means that the machine does not restore the default settings until you press Start to begin copying, or Stop/Clear to cancel.

6.Press OK to save the selection.

7.Press Stop/Clear to return to ready mode.

Copying_ 5