Solving other problems, Power problems | Samsung CLX-6220, CLX-6250

Message		Meaning	Suggested solutions
Replace TR. Belt	The life of the transfer		Replace the transfer
Replace with new	belt has expired.		belt with a new one.
Transfer belt unit			Install a
			Samsung-genuine
			transfer belt.
Tray[yyy] cassette	The tray is not properly		To close the tray, lower
Out	closed.		the rear edge, align it
Tray[yyy] cassette			with the slot, and slide it
is pulled out.			into the printer.
Insert it properly
Tray[yyy] has a	The machine cannot		Reinstall the optional
problem	communicate with the		tray. If the problem
Communication	optional tray .		persists, call for service.
problem occurred
with tray[yyy]
Tray[yyy] Not	The optional tray is not		Reinstall the optional
Installed	installed.		tray. If the problem
Tray[yyy] is not			persists, call for service.
installed. Install it
Tray2 has a problem	The machine cannot		Check the cable
Communication	communicate with the		connecting the machine
problem occurred	optional tray 2.		and the optional tray 2.
with Tray2			If the problem persists,
			call for service.
Tray2 Not installed	The optional tray2 is not		Install the optional tray
Tray2 is not	installed.		2. If the optional tray 2 is
installed. Install it			installed, check the
			cable connecting the
			machine and the
			optional tray 2. If the
			problem persists, call
			for service.
Updating Data	•	The machine is	Wait a few minutes.
Please Wait...		updating data.
	•	This message can
		also appear when
		printing on paper
		smaller than A4, such
		as envelope or B5. In
		this case, the machine
		is adjusting the
		settings for best print
		results.

Solving other problems

The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service.

Power problems

Click this link to open an animation about power problems.

Troubleshooting_ 12

Image 117

Samsung CLX-6220, CLX-6250 manual Solving other problems, Power problems

Contents

Multi-Functional Printer Copyright Copyright Important safety symbols Safety informationSafety information Operating environment Operating method Maintenance / Checking Installation / Moving Supply usage Regulatory information Laser Safety StatementTaiwan only Regulatory information Mercury Safety Ozone SafetyPower Saver Recycling Radio Frequency Emissions Correct disposal of batteries in this productFCC Information to the User Canadian Radio Interference Regulations FCC Statement for Wireless LAN use Taiwan only Turkey onlyFederal Communications Commission FCC Ringer Equivalence Number Russia only Fax Branding You should also know that Replacing the Fitted Plug for UK OnlyImportant warning Green and Yellow Earth Declaration of Conformity European Countries Approvals and CertificationsEC Certification OpenSSL License Wireless Guidance Original SSLeay License China only Convention About this user’s guideAbout this user’s guide Convention Description Example Material name Description Finding more information Features of your new product Special FeaturesFeatures of your new product IPv6 Features by ModelsCLX-6220 Series CLX-6250 Series Optional Tray Machine overview IntroductionFront view Introduction EXT Rear view Control panel overview Starts a job in black or color mode Understanding the Status LED Power Saver buttonIntroducing the useful buttons Menu button Getting started Setting up the hardwarePrinting a demo Supplied software Microsoft Windows System requirements Macintosh Installing USB connected machine’s driverLinux Windows Search again Direct InputHelp Installing the Linux Unified Driver Installing the SmartPanelInstalling the Printer Setting Utility Setting up a host computer Setting up a client computerSharing your machine locally Using a wired network Network setupNetwork environment Introducing useful network programs IPv4 setting using control panel Setting IPv4 addressIPv4 setting using SetIP Program Windows IPv4 setting using SetIP Program Macintosh Network parameter setting Installing network connected machine’s driverIPv4 setting using SetIP Program Linux Open the /opt/Samsung/mfp/share/utils Select Install now HSelect Uninstall and click Uninstall Install Linux DriverAdd network Printer Select Socket/HP Jet Direct in Printer Type Installing the Unix printer driver package IPv6 ConfigurationUninstalling the printer driver package Setting up the printer Installing printer driver Setting IPv6 addressesConnecting SyncThru Web Service DHCPv6 address configuration Stateful Altitude adjustment Basic setupSetting the date and time Changing the display language Changing the default mode Changing the clock modeSetting sounds Entering characters using the number keypad Setting job timeout Using the power saving modeSetting the color report Setting the default tray and paper Changing the font setting Preparing originals Media and trayLoading originals On the scanner glass Mode Size Source Media sizes supported in each modeSelecting print media Document feeder Changing the tray size Loading paper in the trayTray 1/optional tray Tips on using the multi-purpose tray Multi-purpose trayFull Empty Printing on special media EnvelopeTypes Tray Optional tray Multi-purpose Card stock/Custom-sized paper LabelsLetterhead/Preprinted paper Used paper Selecting an output location Setting the paper size and type For A4- or Legal-sized paper For Letter-sized paper Printer driver features PrintingIntroducing useful software programs Canceling a print job Basic printingOpening printing preferences Using special print features Using helpUsing a favorite setting Printing multiple pages on one sheet of paper Printing on both sides of paper Printing bookletsChange percentage of your document Fitting your document to a selected paper size Using overlay PCL driver only Using watermarks Adjusting color Job Setting CLX-6250 Series onlyGraphics tab options Deleting a page overlay What is Direct Printing Utility? Using direct printing utility CLX-6250 Series onlyPostscript options Enhancing glossiness Windows only Setting your machine as a default machine Changing the default print settingsUsing the job accounting option Printing to a file PRN Changing printer settings Macintosh printingPrinting a document Printer Features Job Setting CLX-6250 Series onlyLinux printing Printing from applications Open the Unified Driver Configurator Configuring Printer PropertiesPrinting files Printer Properties window opens Changing the printer settings Unix printingProceeding the print job Changing the settings for each copy CopyingBasic copy Using special copy features Changing the default copy settingsReducing or enlarging copies ID card copying Poster copying Up or 4-up copying N-upClone copying Book copying Margin shift copying Adjusting background imagesEdge erase copying Gray enhance copying Copying both sides of the originals Setting copy timeout Scanning Setting up an email accountBasic scanning method Scanning originals and sending through email Scan to Email Storing email addresses Storing on your local machineSearching Address Book for an entry For USB connected machine Scanning originals and sending to your computer Scan to PCFor network connected machine Printing Address Book Scanning originals and sending via SMB/FTP Scan to server Setting authentication for authorized user Set Scan Button tab Using Samsung Scan and Fax ManagerChange Port tab Scan Assistant Changing the default scan settings Changing the scan feature settingsScanning with TWAIN-enabled software Scanning using the WIA driver Macintosh scanning Setting scan information in Scan ManagerWindows Vista Scanning with USB To save a new Job Type setting Adding Job Type SettingsTo save a Job Type setting for the next scan job Linux scanning Using the Image Manager To delete a Job Type settingTools Name Function Faxing Using a fax in your computerPreparing to fax Sending a fax Sending a fax Setting the fax headerSending a fax manually Set Fax Receiving tab Confirming a transmission Delaying a fax transmissionAutomatic redialing Redialing the last number Receiving a fax Receiving faxes using Drpd mode Receiving faxes manually using an extension telephoneReceiving in secure receiving mode Activating secure receiving mode Forwarding a fax to another destination Adjusting the document settings Setting up address book Speed dial numbers Group dial numbersSearching address book for an entry Deleting a Address Book for entry Printing sent fax report automatically Using USB memory device Using usb memory deviceAbout USB memory device Scanning to an USB memory device Printing from a USB memory device Backing up dataManaging USB memory Viewing the USB memory status Formatting a USB memory device Fax setup Machine status and advanced featureChanging the fax setup options Sending Change default Copy setupChanging the copy setup options Auto Report Scan setup Changing the scan setup optionsPrinting a report Clearing memory NetworkDocument management Job management Menu overviewItems Option Machine status and advanced feature Wirelessd DHCPv6 ConfigWlan Settings Wlan Default To access SyncThru Web Service Using SyncThru Web ServiceSyncThru Web Service overview Management tools Mail notification setup Using the Smart Panel programSetting the system administrator information Understanding Smart Panel Using SmarThru Office Changing the Smart Panel Program SettingsSmarthru Office Scanning Opening the Unified Driver Configurator Using the Unified Linux Driver ConfiguratorPrinting Sending a file via fax Scanners configuration Printers configurationPrinters tab Classes tab Ports configuration Switches to Ports configurationSharing Ports Between Printers and Scanners Adjusting the color contrast MaintenancePrinting a machine report Monitoring the supplies life Cleaning a machine Using Toner Low AlertCleaning the outside Cleaning the inside Cleaning the scan unit Tips for moving & storing your machine Storing the toner cartridgeHandling instructions Use of non-Samsung and refilled toner cartridge Troubleshooting TroubleshootingRedistributing toner Input misfeed Clearing original document jamsExit misfeed Roller misfeed Clearing paper jams Tips for avoiding paper jamsTray Optional tray Inside the machine Exit area Troubleshooting Duplex unit area Message Meaning Suggested solutions Understanding display messagesChecking display messages Is not installed InstalledInstall it Reinstall Group Cancelled Junk Fax ErrorLine Error Problem Continue Cancel Continue or Cancel. IfBootp problem Bootp has a Power problems Solving other problems Condition Suggested solutions Paper feeding problems Condition Possible cause Suggested solutions Printing problemsMachine Does not print Materials from Printing Selects printWrong paper Preferences may Source Printing quality problems Condition Condition Suggested solution Copying problems Fax problems Scanning problems Common PostScript problems Samsung Scan and Fax Manager ProblemCommon Windows problems Problem Possible cause Solution Common Linux problems Configuration, then press Drivers. Make Common Macintosh problemsNot appear on Scanners list How to purchase Supplies and accessoriesSupplies and accessories Available supplies Maintenance parts Available accessoriesAccessory Function Part name Replacing the toner cartridge Replacing the paper transfer belt Necessary precautions to take when installing accessories Activating the added accessories in printer propertiesUpgrading a memory module Job Settings Installing a memory modulePrinting with the optional memory CLX-6250 Series only Controlling the active job queue Installing a wireless network interface card Installing a wireless network interface cardFile Policy Configuring the machine’s wireless network Using the control panelConnector Wireless Interface card Installing a hard disk Installing a hard diskPrinting with the optional hard disk Creating new form files Form file Deleting residual image data Checking replaceable’s lifespan Hardware specifications SpecificationsEnvironmental specifications Electrical specifications Specifications Print media specifications Specifications Remote installation Administrator’s guide windows onlyDomain remote installation Administrator’s Guide Windows only Workgroup Remote Installation Create Customized Installer Error log messagesCreating a setup package Creating a setup script file Modifying a setup script fileSet Printer Drivers window appears. Click Next Silent installation Mode Command-line ParametersCommand Definition Description Line Opens Printers and Faxes Language codePrinters and Faxes folder Code Language Create Customized Installer related questions Remote Installation related questionsFrequently Asked Question Question Answer Contact samsung worldwide Contact Samsung worldwideCountry/Regio Customer Care Center Web Site Portugal Glossary Duplex Dot Matrix PrinterDuty Cycle Emulation Intranet ITU-T No chartIP address MAC address NetWare ResolutionOriginals PostScript Toner Cartridge Subnet MaskUNC Path Watermark