copying

This chapter gives you step-by-step instructions for copying documents.

This chapter includes:

Basic copy

Changing the settings for each copy

Changing the default copy settings

Basic copy

This is the normal and usual procedure for copying your originals.

1.Press (Copy) on the control panel.

2.Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid.

3.If necessary, adjust the settings for each copy such as Reduce/Enlarge, Darkness, Original Type and more (See "Changing the settings for each copy" on page 1).

4.Enter the number of copies using the arrow or number keypad, if necessary.

5.Press Start on the control panel to begin copying.

To cancel the current copy job, press Stop/Clear on the control panel.

Changing the settings for each copy

Your machine provides default settings for copying so that you can quickly and easily make a copy. However, if you want to change the options for each copy, use the copy function buttons on the control panel.

If you press Stop/Clear while setting the copy options, all of the options you have set for the current copy job will be canceled and return to their default status after the machine completes the copy in progress.

Changing the darkness

If you have an original containing faint marking and dark images, you can adjust the brightness to make a copy that is easier to read.

Using special copy features

Copying both sides of the originals

Setting copy timeout

1.Press (Copy) on the control panel.

2.Press Menu on the control panel.

3.Press the up/down arrow to highlight Copy Feature and press OK.

4.Press the up/down arrow to highlight Darkness and press OK.

5.Press the up/down arrow until the contrast mode you want is highlighted and press OK.

Lightest: Works well with darker print.

Light: Works well with dark print.

Normal: Works well with standard typed or printed originals.

Dark: Works well with light print.

Darkest: Works well with lighter print or faint pencil markings.

6.Press Stop/Clear to return to ready mode.

Selecting the type of originals

The original type setting is used to improve the copy quality by selecting the document type for the current copy job.

1.Press (Copy) on the control panel.

2.Press Menu on the control panel.

3.Press the up/down arrow to highlight Copy Feature and press OK.

4.Press the up/down arrow to highlight Original Type and press OK.

5.Press the up/down arrow until the image mode you want is highlighted and press OK.

Text: Use for originals containing mostly text.

Text/Photo: Use for originals with mixed text and photographs.

Photo: Use when the originals are photographs.

Magazine: Use when the originals are magazines.

6.Press Stop/Clear to return to ready mode.

Selecting the scan size of originals

You can choose the size to be scanned.

The scan size options may vary between document feeder or scanner glass.

1.Press (Copy) on the control panel.

2.Press Menu on the control panel.

3.Press the up/down arrow to highlight Copy Feature and press OK.

4.Press the up/down arrow to highlight Scan Size and press OK.

5.Press the up/down arrow until the scan size you want is highlighted and press OK.

6.Press Stop/Clear to return to ready mode.

Copying_ 1

Page 63
Image 63
Samsung CLX-6220, CLX-6250 manual Copying, Basic copy, Changing the settings for each copy