Macintosh

OPERATING

 

Requirements (recommended)

 

 

 

 

SYSTEM

 

CPU

RAM

free HDD

 

 

space

 

 

 

 

 

 

 

 

 

Mac OS X

Intel

128 MB for a

1 GB

10.3 ~ 10.4

 

Processors

PowerPC based

 

 

PowerPC G4/

Mac (512 MB)

 

 

 

G5

512 MB for a

 

 

 

 

Intel-based Mac

 

 

 

 

(1 GB)

 

 

 

 

 

 

Mac OS X

Intel

512 MB (1 GB)

1 GB

10.5

 

Processors

 

 

 

867 MHz or

 

 

 

 

faster Power

 

 

 

 

PC G4/ G5

 

 

 

 

 

 

 

Mac OS X

Intel

1 GB (2 GB)

1 GB

10.6

 

Processors

 

 

 

 

 

 

 

Linux

Item

Requirement (recommended)

 

 

Operating

RedHat® Enterprise Linux WS 4, 5 (32/64 bit)

system

Fedora Core 2~10 (32/64 bit)

 

SuSE Linux 9.1 (32 bit)

 

OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0,

 

11.1 (32/64 bit)

 

Mandrake 10.0, 10.1 (32/64 bit)

 

Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit)

 

Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit)

 

SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)

 

Debian 3.1, 4.0, 5.0 (32/64 bit)

 

 

CPU

Pentium IV 2.4 GHz (Intel Core™2)

 

 

RAM

512 MB (1024 MB)

 

 

Free HDD space

1 GB (2 GB)

 

 

It is necessary to claim swap partition of 300 MB or larger for working with large scanned images.

The Linux scanner driver supports the optical resolution at maximum.

UNIX

Item

Requirements

 

 

Operating

Sun Solaris / SPARC

system

Sun Solaris / x86

 

HP-UX / PA-RISC

 

HP-UX / Itanium

 

IBM AIX / Power

 

 

Free HDD space

Up to 100 MB

 

 

Installing USB connected machine’s driver

A locally connected machine is a machine directly attached to your computer using the USB cable. If your machine is attached to a network, skip the following steps below and go on to installing network connected machine’s driver (See "Installing network connected machine’s driver" on page 3).

Only use an USB cable no longer then 3 m (10 ft. ).

Windows

You can install the machine software using the typical or custom method.

The following steps below are recommended for most users who use a machine directly connected to your computer. All components necessary for machine operations will be installed.

1.Make sure that the machine is connected to your computer and powered on.

If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel in close the window.

2.Insert the supplied software CD into your CD-ROM drive.

The software CD should automatically run and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM drive. Click OK.

If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click Start > All programs > Accessories > Run.

Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM drive and click OK.

If the AutoPlay window appears in Windows Vista, Windows 7 and Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows.

3. Select Install now.

If necessary, select a language from the drop-down list.

For CLX-6250 Series installation window, you can see Wireless Setting and Installation menu. You can use this menu if an optional wireless network card is installed and/or the machine is connected to your computer with a USB cable.

Install the optional wireless network card. Instructions for Wireless Setting and Installation, refer to the wireless network installation guide provided with the optional wireless network card.

The Advanced Installation has two options, Custom

Getting started_ 3

Page 28
Image 28
Samsung CLX-6250, CLX-6220 manual Installing USB connected machine’s driver, Macintosh, Linux, Windows