•On: Prints output in sets to match the sequence of originals.
•Off: Prints output sorted into stacks of individual pages.
9.Press Stop/Clear to return to ready mode.
10.Press Start to begin copying.
One complete document will print followed by the second complete document.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper.
2 or
1 | 2 |
2 |
|
3 | 4 |
1 |
|
1.Press 
(Copy) on the control panel.
2.Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid.
3.Press Menu on the control panel.
4.Press the up/down arrow to highlight Copy Feature and press OK.
5.Press the up/down arrow to highlight Layout and press OK.
6.Press the up/down arrow until 2up or 4up highlights and press OK.
7.Press Stop/Clear to return to ready mode.
8.Press Start to begin copying.
You cannot adjust the copy size using Reduce/Enlarge for the
Poster copying
Your original will be divided into 9 portions. You can paste the printed pages together to make one
This copy feature is available only when you place originals on the scanner glass.
1.Press 
(Copy) on the control panel.
2.Place a single original face down on the scanner glass.
3.Press Menu on the control panel.
4.Press the up/down arrow to highlight Copy Feature and press OK.
5.Press the up/down arrow to highlight Layout and press OK.
6.Press the up/down arrow to highlight Poster Copy and press OK.
7.Press Stop/Clear to return to ready mode.
8.Press Start to begin copying.
Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The number of images is automatically determined by the original image and the paper size.
This copy feature is available only when you place originals on the scanner glass.
1.Press 
(Copy) on the control panel.
2.Place a single original face down on the scanner glass.
3.Press Menu on the control panel.
4.Press the up/down arrow to highlight Copy Feature and press OK.
5.Press the up/down arrow to highlight Layout and press OK.
6.Press the up/down arrow to highlight Clone Copy and press OK.
7.Press Stop/Clear to return to ready mode.
8.Press Start to begin copying.
You cannot adjust the copy size using Reduce/Enlarge for the Clone Copy feature.
Book copying
The Book Copy feature allows you to copy an entire book. If the book is too thick, lift the cover until its hinges are caught by the stopper and then close the cover. If the book or magazine is thicker than 30 mm, start copying with the cover open.
This copy feature is available only when you place originals on the scanner glass.
1.Press 
(Copy) on the control panel.
2.Place a single original face down on the scanner glass.
3.Press Menu on the control panel.
4.Press the up/down arrow to highlight Copy Feature and press OK.
5.Press the up/down arrow to highlight Layout and press OK.
6.Press the up/down arrow to highlight Book Copy and press OK.
Copying_ 3
