Samsung CLX-6250, CLX-6220 manual Silent installation Mode, Command-line Parameters

•If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click Start > All programs > Accessories > Run.

Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM drive and click OK.

•If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control windows.

•If the AutoPlay window appears in Windows 7 and Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Yes in the User Account Control windows.

3.Select Administrator Installation > Create Customized Installer. If necessary, select a language from the drop-down list.

4.Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next.

5.Select Package Type window appears. Select Modify Script.

If you place the mouse cursor over the package type, you can see the detailed information on the bottom right side of the window.

6.Open the script file you want to modify(ex:CONFIG.CI3).

CONFIG.CI3 script file will exist in \Setup\Script subfolder of the created setup package.

7.Select Printer connection window appears. Select the printer connection type and click Next.

•If you selected Network Connection, Search Network Printers window appears, type in the IP address or host name in the information field than click Search. when you are finished, click Next.

•The discovered printer list will show network printers on the same subnet. If you want to specify a network printer that is located over subnet then specify IP address of network printer directly.

•If you can’t search network printers on the network then check whether your firewall setting is disabled. If it is enabled, disable firewall temporarily and try searching again.

•Setup configuration script filename is set as CONFIG.CI3 and it’s not changeable.

8.Set Printer Drivers window appears. Click Next.

If necessary, configure printer name, sharing, shared name and default printer setting. If you changed settings then you should click Apply button to apply changes then click Next.

9.Summary window appears. Check the package information and click Next to start creating the setup package.

You can modify the package configuration by clicking the Back button.

10.When creating the setup package is finished, Packaging Completed window appears.

Check Open package folder upon completion if you want the created package to open automatically after it’s created.

11.Click Finish.

Silent installation Mode

Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. Silent installation can also be performed by using the command script file (See"Create Customized Installer" on page 3).

Command-line Parameters

Following table shows commands that can be used in the command window or in making a script file (See "Creating a setup script file" on page 4).

Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely.

Command-	Definition		Description
line
/s or	Starts silent installation.	Installs machine drivers
/S		without prompting any UIs
		or user intervention.
/p”<port	Specifies printer port.	Printer port name can be
name>” or	Network Port will be	specified as IP address,
/P”<port		hostname, USB local port
	created by use of
name>”		name or IEEE1284 port
	Standard TCP/IP Port
		name.
	monitor. For local port,
		For example
	this port must exist on
		•	/p”xxx.xxx.xxx.xxx” in
	system before being
	specified by		where, “xxx.xxx.xxx.xxx”
	command.		means IP address for
			network printer.
			/p”USB001”, /P”LPT1:”,
			/p”hostname”
		•	When installing the
			driver silently in Korean,
			type in-Setup.exe /s
			/L"0x0012” or
			Setup.exe /s /L"18” .
/l”<Lang_cod	Sets language code.	Decimal number and
e>” or	The default language	hexadecimal number can
/L”<Lang_co		be used but hexadecimal
	will be decided
de>”		number must have prefix
	automatically if there
		with “0X”. Refer to
	is no specified
		Language Codes section for
	installation language
		available <Lang_code>.
	commanded. The
		This command applies to all
	default language
		machine’s drivers and
	depends on your
		application software if
	system locale
		specified language is
	information.
		supported. All software
		included in the machine’s
		drivers will be installed as
		the specified language.
		•	Setup.exe /s /L"0x0012”
			or Setup.exe /s /L"18” ;
			install setup package
			silently with Korean.
/a”<dest_pat	Specifies destination path	Since machine drivers
h>” or	for installation.	should be installed on the
/A”<dest_pat	The destination path	OS specific location, this
h>”		command applies to only
	should be a fully
		application software.
	qualified path.

Administrator’s Guide (Windows only)_ 5