e)Press the the up/down arrow to highlight PC: appears and press OK.
1.Open the Samsung Scan & Fax Manager.
•For Windows, from the Start menu, click All programs > Samsung Printers > Samsung Scan & Fax Manager > Samsung Scan & Fax Manager.
Or you can open this program by right clicking the Smart Panel icon in the Windows task bar and selecting the Samsung Scan & Fax Manager.
•For Macintosh, from the Smart Panel menu on status bar, click Samsung Scan & Fax Manager.
2.Select the appropriate machine from the Samsung Scan & Fax Manager.
3.Click Properties.
4.Use Set Fax Receiving to change the fax settings.
5.When setting is done, press OK.
Set Fax Receiving tab
•Enable Fax Receiving: You can select whether to use or not.
•File Format: You can convert the received faxes to PDF or TIFF.
•Save Location: Selects location to save the converted faxes.
•Prefix: Selects file or folder scheme as prefix.
•Notify me when fax received: Shows popup window to notify receiving a fax.
•Print received fax: After receiving the fax, set prints information for the received fax.
Change Port tab
•Local Scanner: Select when your machine is connected via USB or LPT port.
•Network Scanner: Select when your machine is connected via network port.
-Auto detection on the network: Automatically detects your
machine.
Sending a fax
This part explains how to send a fax and the special methods of transmission.
When you place the originals, in the document feeder and/or on the platen glass one at a time (See "Loading originals" on page 1). If the originals are placed on both the document feeder and the scanner glass, the machine will read the originals on the document feeder first, which has higher priority in scanning.
Setting the fax header
In some countries, you are required by law to indicate your fax number on any fax you send.
1.Press 
(Fax) on the control panel.
2.Press Menu on the control panel.
3.Press the up/down arrow to highlight System Setup and press OK.
4.Press the up/down arrow to highlight Machine Setup and press OK.
5.Press the up/down arrow to highlight Machine ID and press OK.
6.Enter your name or the company name using the number keypad. You can enter alphanumeric characters using the number keypad, and include special symbols by pressing the 1 button. For details on how to enter alphanumeric characters, see "Entering characters using the number keypad" on page 2.
7.Press OK to save the ID.
8.Press the up/down arrow to highlight Machine Fax No. and press OK.
9.Enter your fax number using the number keypad and press OK.
10.Press Stop/Clear to return to ready mode.
Sending a fax
1.Press 
(Fax) on the control panel.
2.Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3.Adjust the resolution and the darkness to suit your fax needs (See "Adjusting the document settings" on page 6).
4.Enter the receiving fax machine’s number.
You can use speed dial numbers, or group dial numbers. For details about storing and searching for a number, see "Setting up address book" on page 7.
5.Press Start on the control panel. The machine starts to scan and send a fax to destinations.
•If you want to send fax directly from your computer, use SmarThru Office (See "Using SmarThru Office" on page 3).
•When you want to cancel a fax job, press Stop/Clear before the machine start transmission.
•If you used the scanner glass, the machine shows the message asking to place another page.
•While the machine is sending a fax, you can not send an email at the same time.
Sending a fax manually
This method is sending a fax using On Hook Dial on the control panel.
1.Press 
(Fax) on the control panel.
2.Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3.Adjust the resolution and the darkness to suit your fax needs (See "Adjusting the document settings" on page 6).
4.Press On Hook Dial on the control panel.
5.Enter a fax number using the number keypad on the control panel.
6.Press Start when you hear a
