Installing a memory module
1.Turn the machine off and unplug all cables from the machine.
2.Remove the screws and remove the rear cover.
3.Remove the screws, then lift up the cover slightly and pull the cover to the right.
1 Control board cover
4.Remove the new memory module from its bag.
5.Holding the memory module by the edges, align the memory module in the slot at about a
The notches and grooves illustrated above may not match those on an actual memory module and its slot.
6.Press the memory module into the slot with care until you hear a 'click'.
Do not press the memory module strongly or the module may be damaged. If the module does not seem to fit into the slot properly, carefully try the previous procedure again.
7.Install the control board with the screw removed in step 3.
8.Install the rear cover with the screw removed in step 2.
9.Reconnect the power cord and printer cable, and turn the machine on.
If you use the PS driver, you must activate the added memory in the PS driver properties
(See "Activating the added accessories in printer properties" on page 4).
Printing with the optional memory (CLX-6250 Series only)
•You can only use this feature if you have installed the 512 MB optional memory.
•After installing the optional memory, you can use advanced printing features, such as proofing a job and specifying of printing a private job in the printer properties window.
Job Settings
This option allows you to choose how to print the printing file by using the 512 MB optional memory.
1.Open the document you want to print.
2.Select Print from the File menu. The Print window appears.
3.Select your printer driver from the Select Printer list.
The basic print settings including the number of copies and print range are selected within the Print window.
4.Access Printing Preferences (See "Opening printing preferences" on page 2).
5.Click the Advanced tab then select Job Settings.
6.Select the Print Mode you want .
•Normal: This mode prints without storing your document in the optional memory.
•Proof: This mode is useful when you print more than one copy. You can print one copy first to check, than print the rest of copies later.
•Confidential: This mode is used for printing confidential documents. You need to enter a password to print.
7.Select OK.
Controlling the active job queue
All of the print jobs waiting to be printed are listed in the active job queue in the order you sent them to the printer. You can delete a job from the queue before printing, or promote a job to print sooner.
1.Press Menu on the control panel.
2.Press left/right arrow until Job Management appears and press OK.
3.Press left/right arrow until Active Job appears and press OK.
4.Press left/right arrow until the user’s name and file name you want to use appears and press OK.
If the select file is a confidential print job, enter the specified
Use the left/right arrow to enter digits. When you press OK, the cursor will move to the next character. When you finish entering the password, press OK.
