Samsung CLX-6220 Paper Empty, Paper is empty, Yyy Load paper Jam bottom, Jam in exit area

Message	Meaning	Suggested solutions
Paper Empty in	There is no paper in the	Load paper in the tray
[yyy]	tray.	(See "Loading paper in
Paper is empty		the tray" on page 3).
in [yyy].
Load paper
Jam bottom of	Paper has jammed	Clear the jam (See "In
duplex	during duplex printing.	the duplex unit area" on
		page 7).
Jam in exit area	Paper has jammed in exit	Clear the jam (See "In
	area.	exit area" on page 5).
Jam inside machine	Paper has jammed	Clear the jam (See
	inside the machine.	"Inside the machine" on
		page 4).
Jam inside of	Paper has jammed	Clear the jam (See "In
duplex	during duplex printing.	the duplex unit area" on
		page 7).
Jam top of duplex	Paper has jammed	Clear the jam (See "In
	during duplex printing.	the duplex unit area" on
		page 7).
Junk Fax Error	The machine has	The received fax data
Junk Fax Job	received a fax from	will be deleted.
Cancelled	which is registered as a	Reconfirm junk fax
	junk fax.	setup (See "Receiving"
		on page 1).
Line Busy	The receiving fax	Try again after a few
The line is already	machine did not answer	minutes.
engaged.	or the line is already
Try Again Later	engaged.
Line Error	Your machine cannot	Try again. If the problem
The Fax Line has a	connect with the	persists, wait an hour or
problem.	receiving fax machine or	so for the line to clear
Try Again Later	has lost contact because	again. Or, turn the ECM
	of a problem with the	mode on (See
	phone line.	"Sending" on page 1.)
LSU error	There is a problem in the	Turn the machine off
Error: [aaa]	machine.	and turn it on again. If
Turn off then on		the problem persists,
		call for service.
Memory Full	The memory is full.	Press the left/right
Cancel Start		arrow to highlight
		Cancel or Start, then
		press OK. If you select
		Cancel , the machine
		stops the fax job. If you
		select Start, the
		machine only sends
		scanned documents of
		the fax job.
Memory Full	The memory is full.	Split the transmission
Divide the job		into more than one
		operation.
Memory Full	The memory is full.	Print or remove the
Fax memory is full.		received fax data in the
Print or remove		memory.
received fax job
Motor Error	There is a problem in the	Turn the machine off
Error: [aaa]	machine.	and turn it on again. If
Turn off then on		the problem persists,
		call for service.

Message	Meaning	Suggested solutions
Network Error	There is a problem with	Check the network. If
There is a problem	the network.	the problem persists,
with the network.		ask the system
		administrator or the
		person who has set up
		your local network.
No Answer	The remote fax machine	Try again. Verify the
The remote fax	has not answered after	number to ensure that a
machine has not	several redial attempts.	fax can be received.
answered
Not proper room	The machine is in a room	Move the machine to a
temperature.	with improper room	room with proper room
Change room	temperature.	temperature (See
temperature		"Environmental
		specifications" on
		page 1).
No Such Job	You are performing an	Check the display to
	Add Pages or Cancel	see if there are any
	Job operation, but there	scheduled jobs. The
	are no jobs waiting.	display should indicate
		if any scheduled jobs
		are in Standby mode,
		for example, Delay Fax.
Network problem	The machine is not	Connect the machine to
Network cable is	connected with a	the network with a
not connected.	network cable.	network cable.
Check it.
Network problem	There is a problem on	Turn the power switch
Network card is	the network interface.	off and on. If the
not installed.		problem persists, call
Check it.		for service.
Original paper Jam	The load original has	Clear the jam (See
Original paper Jam	jammed in the document	"Clearing original
inside of scanner.	feeder.	document jams" on
Remove Jam		page 2).
Original paper Jam	The original is too long	Check the originals
Original paper is too	for scanner.	(See "Preparing
long for scanner.		originals" on page 1).
Check size
Output Bin Full	The document output	The document output
Output Bin Full	tray is full.	tray can hold up to 160
Remove printed		sheets of plain paper.
paper		Once the paper is
		removed from the
		document output tray,
		the printer resumes
		printing.
Paper Jam in MP	Paper has jammed in the	Clear the jam (See "In
	multi-purpose tray area.	the multi-purpose tray"
		on page 4).
Paper Jam in tray1	Paper has jammed in the	Clear the jam (See "In
	tray1 area.	tray 1" on page 3).
Paper Jam in tray2	Paper has jammed in the	Clear the jam (See "In
	tray2 area.	optional tray 2" on
		page 3).

Troubleshooting_ 10