
Available accessories
You can purchase and install accessories to enhance your machine’s performance and capacity.
Accessory | function |
| Part name |
Memory module | Extend your machine’s | • | |
| memory capacity. |
| |
|
|
| |
|
| • | |
|
|
| |
|
|
| |
|
|
| |
Optional tray 2 | If you are experiencing | ||
| frequent paper supply |
|
|
| problems, you can |
|
|
| attach an additional 500 |
|
|
| sheets tray. You can |
|
|
| print documents in |
|
|
| various sizes and types |
|
|
| of print materials. |
|
|
Hard disk | Allows you to enhance | ||
the machine’s capability |
|
| |
only) | and print in various |
|
|
| ways. |
|
|
IEEE 802.11 b/g | Allows you to connect | ||
Wireless LAN | your printer to a |
|
|
wireless network. |
|
| |
only)a |
|
|
|
a.Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer where you bought your printer.
Maintenance parts
To purchase maintenance parts, contact the source where you bought the machine.
Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its “Average Yield”.
Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met.
parts | Average yielda |
Fuser unit | Approx. 100,000 pages |
|
|
Document feeder friction pad | Approx. 75,000 pages |
|
|
Document feeder | Approx. 20,000 pages |
|
|
Approx. 70,000 pages | |
Optional tray 2) |
|
|
|
Friction pad | Approx. 70,000 pages |
Optional tray 2) |
|
|
|
a. It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity.
Replacing the toner cartridge
Click this link to open an animation about replacing a toner cartridge.
When the toner cartridge reaches its estimated cartridge life.
•The status LED and the
•The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of the toner cartridge for your machine (See "Available supplies" on page 1).
1.Using the handle, completely open the front door.
2.Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
If you open the front door, be careful not to touch the underneath the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be extremely hot and could damage your