Engine
Removal
1.Do Fan Belt, Removal; page 8.
2.Fig. 5. Disconnect all necessary wiring.
3.Fig. 6. Remove four engine mounting fasteners from underside of engine.
NOTE: All service to the engine must be performed by an authorized HONDA dealer.
A
Belt Tension
Adjustment Screw
Only used on HydraMax 300 and 350
ti1474a
Fig. 6
Installation
|
|
| 1. | Fig. 6. Install four engine mounting fasteners on | |
|
|
|
| underside of engine and secure with locknuts (71). | |
|
|
|
| Torque to 200 | |
Disconnect at connector | ti1477a |
|
| ||
Fig. 5 | 2. | Fig. 5. Connect all necessary wiring. | |||
| |||||
|
|
| 3. | Do Fan Belt, Installation; page 8. | |
12309379