Hitachi 231327 manual Technical Data, Graco Warranty

Page 36

Technical Data

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 horsepower, Honda Maximum working pressure . . . . 3000 psi (207 bar, 21 MPa) Noise Level

Sound power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 dBa per ISO 3744 Sound pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 dBa

measured at 3.1 feet (1 m) Cycles/gallon (liter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 (20) Maximum delivery . . . . . . . . . . . . . . . . 1.75 gpm (6.7 liter/min) Fuel tank capacity . . . . . . . . . . . . . . . . . 0.95 gallons (3.6 liter) Maximum tip size . . . . . . . . . . . . . . . 1 gun with 0. 043 inch tip

2 guns with 0.029 inch tip

3 guns with 0.025 inch tip

4 guns with 0.021 inch tip

Inlet paint strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mesh stainless steel screen, reusable Outlet paint filter . . . . . . . . . . . . . . . . . . . 60 mesh (250 micron) stainless steel screen, reusable

Pump inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 inch npt (f) Fluid outlet size . . . . . . . . . . . . . . . . . 3/8 npsm from fluid filter Wetted parts

Displacement Pump . . . . . . . stainless steel, carbon steel, polyurethane, uhmw polyethylene, Delrinr, leather

Filter . . . . . . . . . . . . aluminum, carbon steel, stainless steel

NOTE: Delrinr is a trademark of the DuPont Company.

Graco Warranty

Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special extended or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance or structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, gas engines, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.

ADDITIONAL WARRANTY COVERAGE

Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Sales Offices: Minneapolis, Detroit

Foreign Offices: Belgium, Korea, Hong Kong, Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

http://www.graco.com

PRINTED IN USA 308398 July 1994, Revised October 1999

36 308398

Image 36
Contents 308398 Model 231326, Series DModel Model 231800, Series BTable of Contents SymbolsInjection Hazard Fire and Explosion Hazard Component Identification and Function Setup Connect hose and gun. Refer to Fig202 204 203 Model 231327 shown 03470A Turn the pressure control switch to OFF To start the engine FuelingStartup Before You Start the SprayerUnlock the gun trigger safety To start the pump Maintenance Pressure Relief ProcedureAfter Each 100 Hours of Operation Change the oil When to Flush How to FlushFlushing Suction Tube Storage Model 231326 shownTroubleshooting Problem Cause SolutionUse a larger diameter hose and/or reduce Bearing Housing & Connecting Rod Drive Housing 114 Model 231326 Shown Pinion Housing Removal Pinion, Clutch, Clamp, Field, & EnginePinion Housing Repairing the PinionClutch Field & Wiring Harness ClampClutch Housing Engine Reassembly Black White RED Pressure Control Replacement TERDisplacement Pump Repairing the pumpInstalling the pump. See Fig Removing the pump. See FigParts Drawing Basic Sprayer Parts List Basic Sprayer Description QtyParts Drawing Lo-Boy Sprayer Parts List Lo-Boy Sprayer Grounding Clamp & Wire76, 77 117 LOCKWASHER, 7/16 Parts List & Drawing Complete Sprayer Parts List & Drawing Pinion AssemblyModels 231327 Ref NoParts List Pressure Control DimensionsParts Drawing Pressure ControlTechnical Data Graco Warranty