Graco 258875, 258870, 258866. 258863. 3A0159E Unclogging Spray Tip/Guard Assembly

Page 15

Unclogging Spray Tip/Guard Assembly

Unclogging Spray Tip/Guard Assembly

Do not operate or spray near children. Do not aim the sprayer at, or spray any person or animal. Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part of the body.

Occasionally, debris from material can accumulate and clog the spray tip. Perform the following steps to unclog the tip.

1.To unclog tip obstruction, engage trigger lock and pull control lever UP to release pressure.

2. Reverse spray tip to UNCLOG position.

3.Aim sprayer at waste area, disengage trigger lock, and put control lever DOWN to spray position. Pull trigger to clear clog.

4.Engage trigger lock. Put control lever UP to release pressure and rotate spray tip back to SPRAY posi- tion.

5.Disengage trigger lock, put control lever DOWN to spray position, and resume spraying.

6.If tip is still clogged, you may have to repeat steps 1 - 5 and rotate the tip from SPRAY to UNCLOG several times. Repeat step 1 to release pressure, remove and clean filter, or replace with new tip assembly.

NOTE: Filter assembly is reverse-threaded: Turn left (or counter-clockwise) to install. Turn right (or clockwise) to remove.

7.If obstruction is cleared, engage trigger lock and rotate arrow-shaped handle back to SPRAY position.

ti14994ati14985a

3A0159E

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 3A0159E Table of Contents Extension Cord Gauge Extension Cord Length Extension CordsFire and Explosion Hazard Equipment Misuse Hazard TrueCoat Component Identification TrueCoat Plus Component Identification Extension Cord Requirements Using Electrical CordsPower Cord Grounding and Electrical RequirementsPressure Relief Procedure Trigger LockControl Lever Position Overheating Protection SetupInstalling Suction Tube Cleanup/StorageSprayer Setup Starting a New Job or Refilling the Cup MaterialsShoulder Strap Installation Reversible Tip Selection ChartThin Medium Heavy Aiming Sprayer Triggering SprayerUnclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningTi14991a Cleaning Sprayer Exterior StorageTips Replacement Parts and Kits Ref. PartPart Problem Cause Solution TroubleshootingSpray Pattern Diagnostics Problem Cause Solution See Reversible Tip Selection Chart See Shutdown and Cleaning,See Install Tip/Guard Assembly, Alternate Priming Method Inlet Valve Cleaning InstallationRemoval Sprayer Technical DataTechnical Data Technical Data 3A0159E Graco Information Graco Standard Warranty
Top Page Image Contents