Graco 258866. 258863. 3A0159E, 258875, 258870 important safety instructions Equipment Misuse Hazard

Page 5

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Always wear appropriate gloves, eye protection, and a respirator or mask when painting.

Do not operate or spray near children. Keep children away from equipment at all times.

Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.

Stay alert and watch what you are doing.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Use only in dry locations. Do not expose to water or rain.

Use in well-lit areas.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swal- lowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

Protective eyewear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

3A0159E

5

Image 5
Contents 3A0159E Table of Contents Extension Cord Gauge Extension Cord Length Extension CordsFire and Explosion Hazard Equipment Misuse Hazard TrueCoat Component Identification TrueCoat Plus Component Identification Power Cord Using Electrical CordsGrounding and Electrical Requirements Extension Cord RequirementsControl Lever Position Pressure Relief ProcedureTrigger Lock Installing Suction Tube SetupCleanup/Storage Overheating ProtectionSprayer Setup Starting a New Job or Refilling the Cup MaterialsThin Medium Heavy Shoulder Strap InstallationReversible Tip Selection Chart Aiming Sprayer Triggering SprayerUnclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningTi14991a Tips Cleaning Sprayer ExteriorStorage Part Replacement Parts and KitsRef. Part Problem Cause Solution TroubleshootingSpray Pattern Diagnostics Problem Cause Solution See Install Tip/Guard Assembly, See Reversible Tip Selection ChartSee Shutdown and Cleaning, Alternate Priming Method Removal Inlet Valve CleaningInstallation Sprayer Technical DataTechnical Data Technical Data 3A0159E Graco Information Graco Standard Warranty