Graco Inc 313516C Hvlp Pressure Verification Kit, Inline Fluid Filter 24B707, Spray Tip Filters

Page 35

HVLP Pressure Verification Kit

For use in checking air cap atomizing and fan pattern air pressure at various supply air pres- sures. Not to be used for actual spraying.

Install the kit air cap on the gun. Turn on the air to the gun, then trigger the gun and read the air pressure on the gauge.

NOTE: To be “HVLP compliant,” the atomizing and fan pattern air pressure must not exceed 10 psi (70 kPa, 0.7 bar).

Part No.	Description

289563	HVLP General Metal

289568	HVLP High Wear 0.059 in. (1.5 mm)

289569	HVLP High Wear 0.070 in. (1.8 mm)

289566	HVLP Wood

ti13594a

FIG. 25: HVLP Pressure Verification Kit

Accessories

Inline Fluid Filter 24B707

Filter is removable without disconnecting the fluid line. Includes housing, o-ring, and

0.005 in. tip filter (equivalent to 100 mesh screen).

Spray Tip Filters

Final filter to prevent foreign particles from ruining sprayed surface smoothness.

25-Count
Carton	3-Pack	Description

238562	238561	0.005 in. (equivalent to 100
		mesh screen)

238564	238563	0.009 in. (equivalent to 60
		mesh screen)

313516C

35

Image 35

Contents

Automatic AirPro Spray Guns Important Safety InstructionsModels ContentsFire and Explosion Hazard Pressurized Equipment Hazard General Metal Applications Selection ChartsHvlp Guns High Wear ApplicationsWood Applications Gun SelectionConventional Guns Proper Needle/Nozzle SelectionAir Caps Air Flow Air FlowAtomizing Air Fan Air Maximum HVLP/Compliant inlet manifold pressure Circulating System InstallationVentilate Spray Booth Configure Gun and ManifoldGround System Install Air FittingsStationary Support Mount GunReciprocating Arm Rod Mount Retrofit Adapter Plate Mount Retrofit Adapter PlateConnect Fluid Hose SetupConnect Air Line Position Air Cap Flush Spray GunSpray Gun Adjust Spray PatternSuggested Starting Settings Atomization Fan Air psiAir Pressure Regulator Incorrect Pressure Relief ProcedureOperation Apply FluidDaily Gun Care Clean and Flush Gun General System MaintenanceProblem Cause Solution TroubleshootingGeneral Troubleshooting Spray Pattern Troubleshooting Disassembly ServiceAlternate Fluid Control Shown Reassembly 17† 21† Alternate Fluid Control 20† 22† 36† 24a 25a PartsGasket Nozzle Repair KitsGeneral Metal Applications Wood Applications High Wear ApplicationsPart Description Qty Manifold with bottom fluid portsPart No C342 Side Fluid Ports and Fan Adjustment ValveNot shown, optional size Not sold separately Part No only Description Qty106 Accessories Count Carton Pack Description Hvlp Pressure Verification KitInline Fluid Filter 24B707 Spray Tip FiltersManifold Model 288221, All Gun Models DimensionsManifold Models 288217 or 288218, All Gun Models Manifold Model 288160 or 288211, All Gun Models Manifold Model 288223 or 24C342, All Gun ModelsMounting Hole Layouts 23.4 mm 10.2 mm 53.3 mm 50 in .7 mm Mounting hole 216 23.4 mm 10.2 mm 27.9 mm 375 in .5 mm Mounting hole Retrofit Adapter Plate Cylinder Air Fluid Pressure Air Pressure Msec to fully Technical DataTriggering Speed Sound DataGraco Headquarters Minneapolis Graco Standard WarrantyGraco Information

Related manuals

Manual 44 pages 41.71 Kb