Graco Inc 261820 specifications Equipment Misuse Hazard

Page 5

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Always wear appropriate gloves, eye protection, and a respirator or mask when painting.

Do not operate or spray near children. Keep children away from equipment at all times.

Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.

Stay alert and watch what you are doing.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not kink or over-bend the hose.

Do not expose the hose to temperatures or to pressures in excess of those specified by Graco.

Do not use the hose as a strength member to pull or lift the equipment.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Use only grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on sprayer and extension cords.

Do not expose to rain. Store indoors.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1, 1, 1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

BURN HAZARD

Equipment surfaces can become very hot during operation. To avoid severe burns, do not touch hot equipment. Wait until equipment has cooled completely.

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eye wear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

312667B

5

Image 5
Contents Related Manual ProX9 Airless Sprayers 312667BUS Patent 6,752,067 European Patent 1 208 Korean Patent Fold-n-StoreCart ProX Sprayers Only SpecificationsGetting Started Grounding Instructions Fire and Explosion Hazard Equipment Misuse Hazard Thermal Overload InstallationGrounding and Electric Requirements ProX Sprayers Only Component IdentificationX7, ProX7, and ProX9 Only ProX9 OnlySG20 SG10 Operation Pressure Control Knob Settings Pressure Relief ProcedureTrigger Lock Trigger Locked SG10 Trigger Unlocked SG10General Repair Information Grounding and Electric Require Basic TroubleshootingProX7 and ProX9 Insert screw ProX7 and ProX9 Only Read Pump does not prime sectionRequirements, Grounding and ElectricalGrounding and Electrical General Problem Motor Does Not Operate Advanced TroubleshootingSee Control Board Diagnostics, Hazard After Thermal General Problem Circuit Breaker is Tripping Control. See List of Kits, General Problem Erratic Motor OperationElectric Requirements, Switch Kit, General Problem Low or Fluctuating OutputSee Control Board Diagnostics, page 25. If Prime/Spray Valve Kit,Use Pressure Control Switch Kit, to replace General Problem Excessive Pressure Build UpControl Switch Kit, Motor Diagnostics ProX7 and ProX9 Motor Diagnostics X5Setup Setup Relieve Pressure,ProX7, ProX9, X5, Pressure Control Switch DiagnosticsPump Diagnostics Control Board Diagnostics ProX7 and ProX9Control Board Diagnostics X5 Kit Number Models Kit Description List of KitsPart Description Qty X5 Model 262800 Parts ListParts X5 Model X5, Model X7 Model 262805 Parts List X7 Model 41a 41b 41c 67a 47a 41d 67b 85a HUB CAP ProX7 and ProX9 Models 261815 and 261820 Parts ListProX7 and ProX9 Models 261815 ProX7 and ProX9 Models 261810 X5 and X7 Models 262800 Wiring DiagramsProX7 and ProX9 Models 261815 Magnum ProX7 Magnum ProX9 Technical DataFor Graco Canada Customers Graco Standard WarrantyGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN