Graco Inc 261820 Specifications, Getting Started, Fold-n-StoreCart ProX Sprayers Only

Page 2

Specifications

Specifications

This equipment is not intended for use with flammable or combustible materials used in places such as cabinet shops or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must comply with NFPA 33 and OSHA requirements for the use of flammable and combustible materials.

						Maximum Working
			Dispense Rate	Hose Length and	Gun		Pressure
			Dispense Rate	Hose Length and	Gun
	Model Name	Series	gpm (lpm)	Diameter	Model	PSI	MPa	bar

	MAGNUM X5	A	0.24 gpm	1/4 in. x 25 ft	SG10	2800	19	193
	MAGNUM X5	A	(0.91 lpm)	(6.4 mm x 7.5 m)	SG10	2800	19	193
			(0.91 lpm)	(6.4 mm x 7.5 m)

	MAGNUM X7	A	0.31 gpm	1/4 in. x 25 ft	SG10	3000	21	207
	MAGNUM X7	A	(1.17 lpm)	(6.4 mm x 7.5 m)	SG10	3000	21	207
			(1.17 lpm)	(6.4 mm x 7.5 m)

	MAGNUM ProX7	A	0.34 gpm	1/4 in. X 50 ft	SG20	3000	21	207
	MAGNUM ProX7	A	(1.29 lpm)	(6.4 mm x 15 m)	SG20	3000	21	207
			(1.29 lpm)	(6.4 mm x 15 m)

	MAGNUM ProX9	A	0.38 gpm	1/4 in. X 50 ft	SG20	3000	21	207
	MAGNUM ProX9	A	(1.44 lpm)	(6.4 mm x 15 m)	SG20	3000	21	207
			(1.44 lpm)	(6.4 mm x 15 m)

Getting Started

Fold-n-Store™Cart (ProX Sprayers Only)

	1. Unfold Fold-n-Store	a	d
	handle (a) and align	a	4. Install hose rack (d) to frame
	handle (a) and align		4. Install hose rack (d) to frame
	as shown.		handle. Install lock nuts.
			Tighten securely.

2. Tighten wingnuts (b).

b ti9675a

3. Grasp cart handle
securely with one hand.		ti9369a
With the other hand, lift		5. Secure power cord in clip
and pull handle (a)		(e) located underneath
and pull handle (a)		storage compartment.
located in front of		storage compartment.
located in front of
sprayer frame, toward
you. Lift up front of
sprayer until you hear a
click and the cart is	c
locked in place.	c	ti9679a
		e
		ti9719a

2

312667B

Image 2

Contents Related Manual ProX9 Airless Sprayers 312667BUS Patent 6,752,067 European Patent 1 208 Korean Patent Fold-n-StoreCart ProX Sprayers Only SpecificationsGetting Started Grounding Instructions Fire and Explosion Hazard Equipment Misuse Hazard Thermal Overload InstallationGrounding and Electric Requirements X7, ProX7, and ProX9 Only Component IdentificationProX Sprayers Only ProX9 OnlySG20 SG10 Trigger Lock Pressure Control Knob Settings Pressure Relief ProcedureOperation Trigger Locked SG10 Trigger Unlocked SG10General Repair Information Basic Troubleshooting Grounding and Electric RequireProX7 and ProX9 Insert screw Read Pump does not prime section ProX7 and ProX9 OnlyGrounding and Electrical Requirements,Grounding and Electrical Advanced Troubleshooting General Problem Motor Does Not OperateSee Control Board Diagnostics, Hazard After Thermal General Problem Circuit Breaker is Tripping Control. See List of Kits, General Problem Erratic Motor OperationElectric Requirements, See Control Board Diagnostics, page 25. If General Problem Low or Fluctuating OutputSwitch Kit, Prime/Spray Valve Kit,Use Pressure Control Switch Kit, to replace General Problem Excessive Pressure Build UpControl Switch Kit, Setup Motor Diagnostics X5Motor Diagnostics ProX7 and ProX9 Setup Relieve Pressure,Pressure Control Switch Diagnostics ProX7, ProX9, X5,Pump Diagnostics Control Board Diagnostics ProX7 and ProX9Control Board Diagnostics X5 List of Kits Kit Number Models Kit DescriptionPart Description Qty X5 Model 262800 Parts ListParts X5 Model X5, Model X7 Model 262805 Parts List X7 Model 41a 41b 41c 67a 47a 41d 67b 85a ProX7 and ProX9 Models 261815 and 261820 Parts List HUB CAPProX7 and ProX9 Models 261815 ProX7 and ProX9 Models 261810 Wiring Diagrams X5 and X7 Models 262800ProX7 and ProX9 Models 261815 Technical Data Magnum ProX7 Magnum ProX9Graco Standard Warranty For Graco Canada CustomersGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN