Reassembly
1 Insert crowned backing nut on shaft of cylinder.
2Using new cylinder from kit, position cylin- der in sprayer frame, inserting end of cylin- der through pump bracket mounting hole.
3Install locking nut flush to end of shaft.
4Install dampening grommet.
5Align hole in end of air cylin- der and replace pin.
Air Cylinder and Solenoid Valve
6Replace cotter pin through hole in pin, bending ends to secure.
ti4456a
ti4421a
7Reattach electric wire terminals. Terminals are
not polarity sensitive and ti4417a can be connected to
either post.
8Gently push hose in quick release fitting.
ti4407a
| 9 Replace RotoFlex HD Pump and hose extension, |
ti4410a | page 12. |
10 Replace front cover and hopper. See Removing and Replacing Hopper, Front and Back Cover, page 9.
ti4455a
24 | 310645H |