Healthyway 310645H Fire and Explosion Hazard, Equipment Misuse Hazard, Electric Shock Hazard

Page 3

Warnings

The following are general Warnings related to the safe setup, use, maintenance and repair of this equipment. Additional, more specific warnings may be found throughout the text of this manual where applicable.

Warning

WARNING

This symbol alerts you to the possibility of seri- ous injury or death if you do not follow the instructions.

Caution

CAUTION

Alerts you to the possibility of damage or destruction of equipment if you do not follow the instructions.

Warnings

Fire and Explosion Hazard

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Keep work area free of debris, including solvent, rags, and gasoline.

Ground equipment in the work area. See Grounding instructions.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Equipment Misuse Hazard

Equipment misuse can cause death or serious injury.

Do not exceed maximum working pressure or temperature rating of lowest rated system compo- nent. See Technical Data, in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings.

Check equipment daily. Repair or replace worn or damaged parts immediately.

Do not alter or modify this equipment.

Use the equipment only for its intended purpose. Call your Graco distributor for information.

For professional use only.

Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.

Do not use hoses to pull equipment.‘

Keep children and animals away from work area.

Comply with all applicable safety regulations.

Electric Shock Hazard

Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Use only grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on sprayer and extension cords.

310645H

3

Image 3
Contents Repair and Parts RTX 1500 Electric Texture SprayerModel Country Manual Languages ModelsManual Model Electric Country Languages RequirementsFire and Explosion Hazard Equipment Misuse HazardElectric Shock Hazard Personal Protective Equipment Pressurized Equipment HazardComponent Identification Component Extension Cords Pressure Relief ProcedurePreparation Grounding and Electric RequirementsHose Lengths Tips for Using GeneratorsAuxiliary Air Compressor GeneratorsRemoving and Replacing Hopper, Front and Back Covers Front CoverHopper Back Cover Disassembly Performing any service on sprayer section,RotoFlex HD Pump Reassembly Turn power switch a on Hose Break-In ProcedureCompressor and Motor Repair Loosen 2 shoulder bolts about 2-3 turns. Do not remove them Ti4470a Compressor Rebuild Kit Insert new piston rod from kit in motor housing Removing Belt Replacing Belt Removing and Replacing BeltLoose belt will not last long. If in doubt, tighten more Roller Replacement Rotor Assembly Replacement Air Cylinder and Solenoid Valve Replace RotoFlex HD Pump and hose extension Relief Valve and Flow Sensor Manifold Air Flow Sensor Replacement Troubleshooting Pressure Relief, Problem Cause SolutionRelieve Pressure, page 7. Remove Relieve Pressure, page 7. Clean Problem Cause SolutionWiring Diagram Air DiagramParts Part No. Description Qty Parts List77 a Grommet Technical Data Pour LES Clients DE Graco Parlant Francais WarrantyGraco Headquarters Minneapolis