Chapter
3
SUPER PRO GUN
Gun Block Assembly 5104-00-01
See Figs. 9.9 - 9.12 for exploded schematic drawings
Flush Valve Assembly
1.Install the 7301-11-008 (O-Ring) onto the 5104-25-1(Flush Valve Button).
2.Install the 7301-3-007 (O-Ring) onto the 5104-23-1 (Flush Seal Body).
3.Install the 9203-2-3 (Compression Spring) into the 5104-24-1 (Flush Valve Body).
4.Smear 6706-2-1 (White Grease) onto the 5104-25-1 (Flush Valve Button), and the 5104-23-1 (Flush Seal Body). Thread the Flush Valve Button through the 9203-2-3 (Compression Spring) located in the 5104-24-1 (Flush Valve Body), and screw on and tighten the Flush Seal Body.
5.Install the 5104-26-1 (Flush Valve Seal) onto the 5104-24-1 (Flush Valve Body) and thread through the 5104-22-1 (Flush Valve Neck).
6.Install the 5104-02-01 (Flush Elbow Assembly) onto the 5104-22-1 (Flush Valve Neck).
7.Install the 5104-21-1 (Flush Valve Split Seal) onto the 5104-24-1 (Flush Valve Body).
SUPER PRO GUN & | 7 |
SUPER PRO GUN II | |
