Roper M6707-1-1 manual Rubber Roll Adjustment

Page 22

7.Slide Rubber Roll Assembly toward the 5103-03-01 (Wedge Rotor Assembly) and tighten the 7102-2-20 (Socket Head Cap Screw)

Rubber Roll Adjustment

1.Slightly loosen the 7102-2-20 (Socket Head Cap Screw), just enough so the Rubber Roll Assembly will slide in the T-Slot. See Fig. 4.6.

Fig. 4.6

2.Apply slight pressure of the Rubber Roll Assembly to the

5103-03-01 (Wedge Rotor Assembly), and tighten the 7102-2-20 (Socket Head Cap Screw).

NOTE

Whenmakingthisadjustment,RubberRollmustnotbeincontactwith

ChopperBlade.

SUPER PRO GUN &

17

SUPER PRO GUN II

 

Image 22
Contents Super PRO GUN & Super PRO GUN Super PRO GUN & Super PRO GUN Corporate HQ & Mfg ManufacturingTable of Contents Super PRO GUN Repair Kit Super PRO GUN II Repair Kit Actuator Assembly See Figs .1 & 9.2 for exploded schematic drawingsSuper PRO GUN Handle Assembly See Figs .3 & 9.4 for exploded schematic drawingsSee Figs .5 & 9.6 for exploded schematic drawings Super PRO GUNSuper PRO GUN Super PRO GUN Flush Valve Assembly Gun Block AssemblySee Figs .9 9.12 for exploded schematic drawings Gun Block Assembly Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN SuperCutter Assembly See Figs .13 9.20 for exploded schematic drawingsRotor Assembly Rubber Roll Assembly Rubber Roll Adjustment Idler Adjustment Actuator Disassembly Handle Disassembly Handle Disassembly Gun Block Disassembly Flush Valve Disassembly Procedures SuperCutter Disassembly Rubber Roll DisassemblyRotor Disassembly Assembly Drawings Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN Super PRO GUN & Super PRO GUN Super PRO GUN & Super PRO GUN Corporate HQ & Mfg Manufacturing/Sales