Roper M6707-1-1 manual Super PRO GUN

18.Install the 5104-2-1 (Valve Rod) through the resin side of the gun. Use the 9301-5-1 (Seal Installation Tool) to center the Valve Rod in the 5104-1-1 (Gun Block).

NOTE

MakesurethattheValveRod iscorrectlyaligned;thelargerholegoesonthe resinside,whilethesmallerholegoesonthecatalystside. SeeFig.3.6.

NOTE

Themiddlehole,intowhichtheactuatingstemwillbeinserted,mustalsobe correctlyaligned. Oneendoftheholehasareliefinthethreads,which shouldfacedown. SeeFig.3.6.

Fig. 3.6

19.Install and hand tighten the 5104-8-1 (Packing Nut) onto the resin side of the 5401-1-1 (Gun Block).

SUPER PRO GUN &	11
SUPER PRO GUN II