Chapter
5
SUPER PRO GUN
Actuator Disassembly 5106-01-01
See Figs. 9.1 & 9.2 for exploded schematic drawings
1.Unscrew the two 5105-13-1 (Rear Screws), and the two 5105-12-1 (Front Screws) to remove the 5106-00-01 (Cylinder Body Assembly) from the 5105-00-01 (Gun Handle Assembly).
2.Remove the two 5106-4-1 (Cylinder Caps) from the 5106-1-1 (Cylinder Body). Remove and discard the two 7301-3-020 (O-Rings) from the 5106-4-1 (Cylinder Caps).
3.Push the 5106-7-1 (Actuator Piston) out of the back of the
5106-1-1 (Cylinder Body). Remove and discard the 7301-3-020 (O-Ring) from the Actuator Piston.
NOTE
Discardallpartstobereplacedbyrepairkit. Allremainingpartsshouldbe thoroughlycleaned,inspectedfordamage,andreplacedifnecessary.
SUPER PRO GUN & | 19 |
SUPER PRO GUN II | |
