Festool TDK 12, TDK 15.6 instruction manual Technical data, Symbols, Intended use

Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

The risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

Technical data

Cordless drill/screwdriver		TDK 12	TDK 15.6
Motor voltage		12 V	15.6 V
Idle-running speed	• 1. speed	0 – 430 rpm	0 - 450 rpm
	• 2. speed	0 – 1400 rpm	0 - 1500 rpm
Max torque	• Soft case	20 Nm	25 Nm
	• Hard case	28 Nm	36 Nm
Adjustable torque	• 1. speed	2 – 7 Nm	2 - 7 Nm
	• 2. speed	0.5 – 2.5 Nm	0.5 - 2.5 Nm
Chuck capacity		1.5 – 13 mm	1.5 - 13 mm
Max. drill diameter for metal / wood		14 mm / 25 mm	16 mm / 35 mm
Tool fitting in chuck		1/4 "	1/4 "
Weight with battery pack		2.0 kg (4.4 lbs)	2.3 kg (5.1 lbs)

Charger		LC 45
Supply voltage (input) / line frequency		120 V ~ / 60 Hz
Charging voltage (output)		7.2 - 18 V (DC)
Charging current
• Quick charge		max. 3 A
• Compensation charge, pulsating		app. 0.06 A
Charging time for	• NiCd 2.0 Ah	app. 45 min
	• NiCd 2.4 Ah	app. 50 min
	• NiMH 3.0 Ah	app. 70 min

Battery pack	BPS 12	BPS 12	BPS 15.6	BPS 15.6
	NiCd 2.4	NiMH 3.0	NiCd 2.4	NiMH 3.0
Order number	492 268	491 821	492 269	491 823
Voltage	12 V	12 V	15.6 V	15.6 V
Capacity	2.4 Ah	3.0 Ah	2.4 Ah	3.0 Ah
Temp. range for charging		5 - 45 °C
Monitoring of charge		by means of NTC thermistor
Weight	0.73 kg (1.6 lbs)	0.75 kg (1.7 lbs)	0.90 kg (2.0 lbs)	0.92 kg (2.0 lbs)

Symbols

V	volts
A	amperes
Hz	hertz
W	watt

~alternating current

n0	no load speed
	Class II Construction
rpm	revolutions per minute

Intended use

Cordless drills are suitable for drilling metal, wood, plastics and similar materials, as well as tightening and screwing in screws (into wood, up to a diameter of 6 mm).

The LC 45 battery charger is designed for recharging the battery pack listed.

The user will be liable for damage due to improper use.

3