Grizzly G9749 owner manual Setup Safety, Items Needed for Setup, Site Considerations

Page 13

SECTION 3: SETUP

Setup Safety

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

Items Needed for

Setup

The following items are needed to complete the setup process, but are not included with your machine:

Description	Qty
• Assistance	1 or more persons

•1⁄2-Ton Forklift or Crane, and Operator

	(for lifting/moving)	1
•	1⁄2-Ton Lifting Straps (for lifting/moving)	2
•	1⁄2-Ton Hook (for lifting/moving)	1
• Safety Glasses (for each person)		1

•Degreaser/Solvent (for clean-up) As needed

•	Shop Rags (for clean-up)	As needed
•	Open end wrench 9⁄16"	1

G9749 Variable Speed Drill Press

Site Considerations

Floor Load

Refer to the Machine Data Sheet on Page 3 for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator.

Placement Location

When establishing a location for your new machine, consider existing and anticipated needs, size of material to be processed through this machine, and space for auxiliary stands, work tables or other machinery. See Figure 5 for the minimum working clearances.

��

��

Figure 5. Minimum working clearances.

Unsupervised children and visitors inside your shop could cause serious per- sonal injury to themselves. Lock all entrances to the shop when you are away and DO NOT allow unsupervised children or visitors in your shop at any time!

-11-

Image 13

Contents Model G9749 Variable Speed Drill Press Page Table of Contents Foreword IntroductionContact Info Machine Data Sheet Other Related Information Identification G9749 Variable Speed Drill Press Safety Instructions for Machinery Additional Safety for Drill Presses 110/220V Operation Circuit RequirementsAmperage Draw Circuit RequirementsExtension Cords Grounding220V Operation 110V OperationSetup Safety SetupItems Needed for Setup Site ConsiderationsTo unpack and move the drill press Unpacking LiftingBolting to Concrete Floors Mounting to Shop FloorTo mount the drill press to the floor Contents Figure Qty Inventory Clean UpTo install the rapid downfeed handles AssemblyTo install the table crank handle Components and Hardware Needed QtyTo test run the machine Test Run Spindle Break-InTo install the drill chuck onto the arbor Installing Drill ChuckOperations To install a drill bit into the chuck Installing/Removing Drill BitsChanging Speeds To remove a drill bit from the chuckChoosing Speeds Using the Drill Bit Speed ChartLubrication Suggestions Quill Travel DrillingTo use the quill lock To use the fine downfeed control To use the rapid downfeed controlTo use the depth gauge and depth stop To adjust table height and rotation Table AdjustmentsHeadstock Rotation To rotate the headstockTo remove the arbor and chuck from the spindle Removing/Installing Arbor and ChuckTo remove the chuck from the arbor To install the arbor into the spindle with the drawbarH5685-4Rotary Table AccessoriesG1076-52-PC. Clamping Kit Schedule MaintenanceUnpainted Cast Iron LubricationAbout Service ServiceTroubleshooting Symptom Possible Cause Possible SolutionDrill Operations Electrical Components G9749 switch wiringWiring Diagram Headstock Parts Breakdown Headstock Components Parts Breakdown Variable Speed Parts Breakdown Base Parts Breakdown Description Parts ListFlat Washer 1/4 403 401 405 404 400 402 406 Label PlacementWarranty and Returns Page Page