Grizzly G9749 Table Adjustments, Headstock Rotation, To adjust table height and rotation

Table Adjustments

The table can be raised/lowered and rotated 360º around the column.

To adjust table height and rotation:

1.Make sure the table lock lever is mounted on the locking nut as shown in Figure 19.

Center

Column

Crank

Handle

Lock

Lever

Figure 19. Table crank handle and lock lever.

2.Unlock the table by rotating the lock lever clockwise.

3.The table can now be adjusted:

—Vertically by using the table crank handle (see Figure 19).

—Horizontally by manually rotating the assembly around the center column.

4.When you have the table in the desired posi- tion, use the lock lever to keep in place.

-22-

Headstock Rotation

The headstock can be adjusted 360º around the column.

To rotate the headstock:

Note: Make sure the drill press is properly bolted to the floor before doing this proce- dure.

1.UNPLUG THE DRILL PRESS!

2.Rotate the two headstock lock levers counter- clockwise to loosen them (see Figure 20).

Lock Levers

Figure 20. Headstock lock levers.

3.Rotate the headstock to the desired position and use the lock levers to secure the head- stock in place.

G9749 Variable Speed Drill Press