Table Adjustments
1.To adjust the table up or down, loosen the col- umn lock handle and turn the crank handle to the desired height. Tighten the column lock handle. Figure 15.
Lock Handle
Figure 15.
2.To swing the table, loosen the column lock handle and swing the table to the desired position. Tighten the column lock handle. For long workpieces, swing the work table away 180° and use the base as your table.
3.To rotate the table, loosen the table lock han- dle, rotate the table to the desired position and tighten the table lock handle. Figure 16.
Lock Handle
Figure 16.
4.To tilt the table, loosen the pivot bolt with the 12mm Allen wrench supplied. Figure 17. Tilt the table to the desired angle (up to 45°). Tighten the pivot bolt.
Pivot Bolt
Figure 17.
|
|
|
|
|
|
|
|
|
|
|
|
| G4008/G4009 Drill Press | ||