Grizzly G0463 owner manual Main Specifications, Table Info, Construction, Other, Features

Main Specifications:
Spindle Travel	3-3/8 in.
Swing	18 in.
Longitudinal Table Travel	15-7/8 in.
Cross Table Travel	5-3/4 in.
Head Travel	14-7/8 in.
Max. Dist Spindle To Column	8 in.
Max. Dist Spindle To Table	14-3/4 in.
Drilling Cap For Cast Iron	1 in.
Drilling Cap For Steel	1in.
No. Of Vert. Spindle Speeds	High/Low
Range Of Vert. Spindle Speeds	0-1000, 0-2000 RPM
Quill Dia	2.362 in.
Table Info
Table Length	21-5/8 in.
Table Width	6-1/4 in.
Table Thickness	1-1/2 in.
No. Of T Slots	3
T Slots Width	0.470 in.
T Slots Height	0.750 in.
T Slots Centers	1-11/16 in.
Stud Size	3/8 in.
Lead Screw Diameter	5/8 in.
Lead Screw TPI	12
Lead Screw Length	26 in.
Construction
Spindle Housing Const	Cast Iron
Table Const	Surface Ground Cast Iron
Head Const	Cast Iron
Column Const	Surface Ground Cast Iron
Base Const	Cast Iron
Paint	Epoxy
Other
Collars Calibrated	0.001-0.0005 in.
Spindle Info
Spindle Taper	R-8
Spindle Sleeve Diameter	2.280 in.
End Milling Cap	3/4 in.
Face Milling Cap	2 in.
Draw Bar Diameter	7/16-20 x 10-3/4 in.
Draw Bar TPI	20
Draw Bar Length	15-5/8 in.
Features
3-16mm Drill Chuck with Key R-8/JT-6 Arbor
Leveling Feet
G0463 Small Mill/Drill	-5-