ADJUSTMENTS
ADJUSTING THE TORQUE
See Figure 4.
The hammer drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. Adjust the torque as necessary. We recommend that you use
Follow these steps to adjust the torque.
■Identify the torque indicator settings located on the front of the hammer drill.
■Rotate the adjusting ring to the desired setting.
•1 - 4 For driving small screws.
•5 - 8 For driving screws into soft material.
•9 - 12 For driving screws into soft and hard materials.
•13 - 16 For driving screws in hard wood.
•17 - 20 For driving large screws.
•21 - 
For heavy drilling.
• |
| For hammer drilling. |
|
CAUTION:
The hammer drill is not designed for reverse hammer- ing. Failure to obey this caution may result in property damage.
HAMMER MODE
TO DECREASE | DRILLING MODE |
| |
TORQUE |
|
TORQUE
TO INCREASEADJUSTING RING TORQUE
Fig. 4
Page 11