Features, Auxiliary Handle Assembly, Depth Gauge ROD

FEATURES

KNOW YOUR HAMMER DRILL

See Figure 1.

Before using this product, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless.

KEYLESS CHUCK

This hammer drill has a heavy-duty keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws.

SWITCH

This hammer drill has a conveniently located variable speed trigger switch.

SWITCH LOCK

The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use.

THREE SPEED GEAR TRAIN

This hammer drill has a three-speed gear train. A slide switch is located on top of the drill to select either LO (1), HI (2) or SUPER-HI (3) speed.

FORWARD/REVERSE SELECTOR

(DIRECTION OF ROTATION SELECTOR)

The hammer drill has a forward/reverse selector located above the switch trigger.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.

HAMMER MODE OPERATION

This tool features a hammer speed of 0-35,200 Blows Per Minute (BPM) in SUPER-HI (3) speed. Blows Per Minute is the number of impacts per minute when operating in Hammer Mode.

AUXILIARY HANDLE ASSEMBLY

An auxiliary handle is installed on the hammer drill. For ease of operation, you may use the handle with either the left hand or the right hand.

DEPTH GAUGE ROD

A depth gauge rod is installed on the auxiliary handle assembly to assist you in controlling the depth of drilled holes.

BIT STORAGE

When not in use, bits provided with your drill-driver can be placed in the storage area located on the top of the motor housing.

Page 8